标准光�？�
SFP+ DAC Twinax Cable,SFP+ Direct Attach Copper Cable,0.5~3 meter,Passive,30AWG
Description
Description
SFP+ DAC (Direct Attach Copper) passive twinax cable is suitable for very short distances transmission and offers a highly cost-effective and low power solution to connect within racks and across adjacent racks.
SFP+ twinax passive cable allows for a serial data transmission up to 10.3Gb/s, which is a low cost choice for very short reach applications of 10GbE or 1-8G Fiber Channel.
SFP+ DAC which replaces two optical modules and a connectorized optical fiber with a twinaxial copper cable assembly offers the higher density, lower cost, and lower power 10 Gigabit Ethernet solution than other cable types such as 10GBASE-CX4 and CAT6/CAT6A 10GBASE-T. AWG(American wire gauge), decreasing gauge numbers denote Increasing wire diameters, the transmission will be more longer, 30AWG for 0.5~3 meters application, the price is better than 24AWG Cable.
Notice:
- 1. When link "Intel NIC" with over 3 meters SFP+ DAC Passive, you need to choose 24AWG, otherwise there will exist instability (1 or 2 meters, 30AWG is ok).
- 2. When link "Cisco switch" with 5 meters SFP+ DAC Passive, you could also choose 30AWG to save cost (because Cisco has enough compensation in the switch’s chipset ).
- 3. When link "Aruba (HP Provurve) switch"，the hardware is different with others.
- 4. The compatible for "Brocade CNA", please choice the Active SFP+ DAC.
- 10GBase-CU
- SFP+ to SFP+ Connetor
- AWG30
- Length: 0.5~3 meters
- 2-pair differential twinax cable
- Impedance: 100-ohm
- EEPROM I2C (MCU: customized)
- Compliant to SFP MSA
- Low power consumption
- Excellent EMI performance
- RoHS Compliant
- Temp. Range(℃): 0~70 (Industrial Temp.: customized)
- 1-8G Fiber Channel
- 1-10G Gigabit Ethernet
- Networking, Storage, Telecommunications
- Hub, Switches, Routers, Servers, Network Interface Card(NICs)
Important Notice
Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.
The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.
Related Products
10G 2km SFP+ Transceiver
10G 2km SFP+ Transceiver
FT-MTRS-1E21-01is a high performance, cost effective modules, which is supporting Multi Rate 4.9152.Gbps to 10.3125Gbps, and transmission distance up to 1.4km on SM fiber. The transceiver consists of two sections: The transmitter section incorporates a laser driver and a 1310nm FP laser.
10G SFP+ LR Transceiver
10G SFP+ LR Transceiver
FT-MTRS-02X13-Gis a high performance, cost effective modules, which is supporting Multi Rate 2.5-10.3125Gbps, and transmission distance up to 10km on SM fiber. The transceiver consists of two sections: The transmitter section incorporates a 1310nm DFB driver.
6G 2km SFP+ Transceiver
6G 2km SFP+ Transceiver
FT-MTRS-6E21-01is a high performance, cost effective modules, which is supporting Multi Rate 1.25-6.25Gbps, and transmission distance up to 2km on SM fiber. The transceiver consists of two sections: The transmitter section incorporates a 1310nm FP Laser and a driver.
XG PON N1 OLT XFP Transceiver
XG PON N1 OLT XFP Transceiver
The F-tone NetworksFT-PLGX1-01A transceiver consists 1577nm DFB EML laser, 1270nm APD photodiode WDM filter and Preamplifier in a high-integrated optical sub-assembly for 2.5G upstream and 10G downstream GPON applications up to 20km.
XGPON ONU SFP+ Transceiver
XGPON ONU SFP+ Transceiver
The F-tone NetworksFT-PNGS1-01A transceiver consists 1270nm DFB laser, 1577nm APD photodiode WDM filter and Preamplifier in a high-integrated optical sub-assembly for 2.5G upstream and 10G downstream XGPON applications up to 20km.
FDR 56GBASE-SR4 QSFP+ Transceiver for MMF, 150M
FDR 56GBASE-SR4 QSFP+ Transceiver for MMF, 150M
F-tone Networks’s FT-77-AMQ14-SR4-M1 Modules are designed for use in Ethernet, SAS, and Infiniband links over multimode fiber. They are compliant with the QSFP+ MSA and the Ethernet, SAS and InfiniBand architecture specifications.