标准光�？�
FDR 56GBASE-SR4 QSFP+ Transceiver for MMF, 150M
Description
Description
F-tone Networks’s FT-77-AMQ14-SR4-M1 Modules are designed for use in Ethernet, SAS, and Infiniband links over multimode fiber. They are compliant with the QSFP+ MSA and the Ethernet, SAS and InfiniBand architecture specifications. The optical transceiver is compliant per the RoHS Directive 2011/65/EU.
- 4 channels 850nm VCSEL and PIN
- Electrical interface compliant to SFF-8436
- Support 56Gbps data rate
- Hot Pluggable QSFP form factor
- Single MPO connector receptacle
- Built-in digital diagnostic functions
- Operating case temperature 0°C to +70°C
- 3.3V power supply voltage
- Maximum link length of 100M on OM3 Multimode Fiber (MMF)and 150M on OM4 MMF
- Maximum power consumption<1.5W
- Infiniband 4xFDR
- Infiniband 4xFDR10
- Infiniband 4xQDR
- SAS 2.1/3.0
- IEEE 40GBase-SR4
Important Notice
Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.
The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.
Related Products
40Gbase-LX4, QSFP+ Transceiver for SMF or MMF, 2 km
40Gbase-LX4, QSFP+ Transceiver for SMF or MMF, 2 km
QSFP+ LX4 is a transceiver module designed for optical transmission applications over both MMF and SMF with transmission distances of up to 150m on MMF (OM3) and 2km on SMF.
40GBase-ER4, QSFP+ Transceiver for SMF, 40 km
40GBase-ER4, QSFP+ Transceiver for SMF, 40 km
QSFP+ transceiver is compliant to MSA SFF-8436 40GBASE-IR4, OTU3 and IEEE 802.3ba. This Quad Small Form-factor Pluggable (QSFP+) optical module ratch up to 40 km, terminated with dual LC connectors.
100GBase-SR4 QSFP28 Transceiver for MMF, 70/100 meters (MPO/MTP)
100GBase-SR4 QSFP28 Transceiver for MMF, 70/100 meters (MPO/MTP)
F-tone Networks's QSFP28 SR4 is a parallel 100Gb/s Quad Small Form-factor Pluggable (QSFP28) optical module. It provides increased port density and total system cost savings.
100GBase-LR4 QSFP28 Transceiver for SMF, 10 km
100GBase-LR4 QSFP28 Transceiver for SMF, 10 km
F-tone Networks's QSFP28 LR4 is a 100Gb/s transceiver module designed for optical communication applications compliant to 100GBASE-LR4 of the IEEE P802.3ba standard.
100GBase-PSM4 QSFP28 (Parallel Single Mode 4 lanes) for MPO/MTP SMF, 1.4 km
100GBase-PSM4 QSFP28 (Parallel Single Mode 4 lanes) for MPO/MTP SMF, 1.4 km
F-tone Networks’s FT-77-AMQ28-IR4-02 is a pluggable, four-channel QSFP28 optical transceiver with bi-directional signal transmission and aggregate 100-Gbps bandwidth for 100G Ethernet. It features the Parallel Single Mode 4 Lane (PSM4) and transmission range of up to 2 km over SMF.
100GBase-IR4 QSFP28 CWDM4 Transceiver for SMF, 2 km
100GBase-IR4 QSFP28 CWDM4 Transceiver for SMF, 2 km
F-tone Networks’s 100G-CWDM4 optical transceiver is a high performance, pluggable, four-channel QSFP28 optical transceiver designed for linkage of 100Gbps Ethernet up to 2 km via a single mode fiber.