100G CFP4 SR4¹âÄ
£¿é£¨100m£©

´ó±¦ÓéÀÖ£¨F-tone Networks£©100G CFP4 SR4¹âÄ
£¿éרΪͨ¹ýË«¹¤¶àÄ£¹âÏËÉè¼ÆµÄ100GÒÔÌ«Íø100GBASE-SR4,OTN OTU4ºÍ128G¹âÏËͨµÀÁ´Â·¶øÉè¼Æ,Ö§³ÖʹÓÃ850nm²¨³¤µÄOM4 MMF´«Êä¾àÀë´ï100Ãס£

100G-CFP4-100

    100G-CFP4-100 is Multi-Vendor MSA Compatible CFP4 (C = 100 in Roman numerals; Centum F = Form Factor; P = Pluggable; 4th generation) optical transceiver, designed to support 100G Ethernet (100GBASE-SR4) and 112G OTN according ITU-T G.959.1 applications using four by parallel physical fiber separated data lanes on each direction .

100GBASE-LR4 10km CFP4 Optical Transceiver

100G CFP4 optical transceiver modules are designed for use in 100 Gigabit Ethernet interfaces over single mode fiber. They are compliant with the CFP MSA, IEEE 802.3ba 100GBASE-LR4 and IEEE 802.3bm CAUI-4. Digital diagnostics functions are available via the MDIO interface, as specified by the CFP MSA and Application Note AN-20xx.  

100GBASE-LR4 and OTN Multirate 10km CFP4 Optical Transceiver

100G CFP4 transceiver modules are designed for use in 100 Gigabit Ethernet and 4x28G OTN client interfaces over single mode fiber. They are compliant with the CFP MSA, IEEE 802.3ba 100GBASE-LR4, IEEE 802.3bm CAUI-4, OTU4 4I1-9D1F specified in ITU-T Recommendations G.959.1/G.709 and Supplement 39 (G.sup39) and OIF CEI-28G-VSR. 

100GBASE-LR4 CFP4 Optical Transceiver

¡ñ 100G CFP4 LR4
¡ñ Duplex LC Connector
¡ñ SMF
¡ñ Wavelength: 1290-1310nm
¡ñ 10km
¡ñ F-tone Networks offer Compatible Service

100GBASE-SR4 CFP4 Optical Transceiver

This CFP Multi-Source Agreement (MSA) defines the CFP4 form factor of an optical transceiver which can support  40Gbit/s and 100Gbit/s interfaces for Ethernet, ITU-T OTN and other applications. Specifications provided in this document are given as a ¡°delta¡± to the CFP MSA Hardware Specification Rev.1.4 or the CFP2 Hardware Specification Rev. 1.0.

CFP4-100G-SR4£ºF-tone Networks¡¯s 100Gb/s transceiver module for optical communication applications compliant to 100GBASE-SR4 of the IEEE P802.3bm standard. The module converts 4 input channels of 25Gb/s electrical data to 4 channels of VCSEL optical signals over 4 multimode fibers for 100Gb/s optical transmission. Reversely, on the receiver side, the module receives 4 channels of VCSEL optical signals over 4 multimode fibers and then converts them to 4 output channels of electrical data.The high speed VCSEL transmitters and high sensitivity PIN receivers provide superior performance for 100Gigabit Ethernet applications up to 100m links over OM4 multimode fibers and compliant to optical interface with IEEE802.3bm Clause 95 100GBASE-SR4 requirements.

OTN Multirate 10km CFP4 Optical Transceiver£ºF-tone Netsworks¡¯s Fiber 100G CFP4 transceiver modules are designed for use in 100 Gigabit Ethernet and 4x28G OTN client interfaces over single mode fiber. They are compliant with the CFP MSA, IEEE 802.3ba 100GBASE-LR4 and OTU4 4I1-9D1F requirements specified in ITU-T Recommendations G.959.1/G.709 and Supplement 39 (G.sup39). Digital diagnostics functions are available via the MDIO interface, as specified by the CFP MSA and F-tone Netsworks Application Note FTAN2015xx. The transceiver is RoHS-6 compliant and lead-free per Directive 2002/95/EC, and F-tone Netsworks Application Note FTAN201538.