标准光� ？�
100GBASE-LR4 and OTN Multirate 10km CFP4 Optical Transceiver
Description
100G CFP4 transceiver modules are designed for use in 100 Gigabit Ethernet and 4x28G OTN client interfaces over single mode fiber. They are compliant with the CFP MSA, IEEE 802.3ba 100GBASE-LR4, IEEE 802.3bm CAUI-4, OTU4 4I1-9D1F specified in ITU-T Recommendations G.959.1/G.709 and Supplement 39 (G.sup39) and OIF CEI-28G-VSR. Digital diagnostics functions are available via the MDIO interface, as specified by the CFP MSA and Application Note AN-20xx. The optical transceiver is RoHS compliant as described in Application Note AN-2038.
Features
● Hot pluggable CFP4 form factor
● Supports 103.1Gb/s and 112Gb/s aggregate bit rate
● Power dissipation < 5W
● RoHS compliant
● Single 3.3V power supply
● Maximum link length of 10km on Single Mode Fiber (SMF)
● 4x28Gb/s DFB-based LAN-WDM transmitter
● 4x28G electrical interface
● Duplex LC receptacles
● MDIO management interface
● Commercial case temperature range: 0°C to 75°C
Applications
● OTN OTU4 4I1-9D1F
● OTUC1 (FOIC1.4)
● 100GBASE-LR4 100G Ethernet
注：本产品有全国产化型号可选
Important Notice
Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.
The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.
Related Products
200G-CFP2-DCO
200G-CFP2-DCO
100G/200G CFP2 DCO module is dual rate (100G/200G) Coherent Multi-Vendor MSA Compatible CFP2 (C (centum) Form Factor Pluggable 2) Transceiver designed for operation over Double Fiber optical cable. On the transmission side, the module converts 25.78Gbps (CAUI-4) or 27.95Gbps (OTL4.4) electrical input channels into one Single Lambda 100G/200G optical signal.
100G-CFP4-10
100G-CFP4-10
100G-CFP4-10 is Multi-Vendor MSA Compatible CFP4 (C = 100 in Roman numerals; Centum F = Form Factor; P = Pluggable; 4th generation) optical transceiver, designed to support 100G Ethernet (100GBASE-LR4) and 112G OTN according ITU-T G.959.1 applications using four parallel LAN WDM separated data lanes on each direction .
100G-CFP4-100
100G-CFP4-100
100G-CFP4-100 is Multi-Vendor MSA Compatible CFP4 (C = 100 in Roman numerals; Centum F = Form Factor; P = Pluggable; 4th generation) optical transceiver, designed to support 100G Ethernet (100GBASE-SR4) and 112G OTN according ITU-T G.959.1 applications using four by parallel physical fiber separated data lanes on each direction .
100G CFP2 LR4
100G CFP2 LR4
LR4 CFP2 transceiver modules are designed for use in 100 Gigabit Ethernet links on up to 10km of single mode fiber. They are compliant with the CFP MSA and IEEE 802.3ba 100GBASE-LR4.The optical transceiver is RoHS compliant.
100GBASE-LR4 and OTU4 10 km Gen2 QSFP28 Optical Transceiver
100GBASE-LR4 and OTU4 10 km Gen2 QSFP28 Optical Transceiver
100GBASE-LR4 10km CFP4 Optical Transceiver
100GBASE-LR4 10km CFP4 Optical Transceiver
100G CFP4 optical transceiver modules are designed for use in 100 Gigabit Ethernet interfaces over single mode fiber. They are compliant with the CFP MSA, IEEE 802.3ba 100GBASE-LR4 and IEEE 802.3bm CAUI-4. Digital diagnostics functions are available via the MDIO interface, as specified by the CFP MSA and Application Note AN-20xx.