标准光�？�
10Gbps 20km SFP+ Optical Transceiver
Description
10Gbps 20km SFP+ Optical Transceiver
Product description
This 1310 nm DFB 10Gbps SFP+ transceiver is designed to transmit and receive optical data over single mode optical fiber for link length 20km.The SFP+ 20km module electrical interface is compliant to SFI electrical specifications. The transmitter input and receiver output impedance is 100 Ohms differential. Data lines are internally AC coupled. The module provides differential termination and reduce differential to common mode conversion for quality signal termination and low EMI. SFI typically operates over 200 mm of improved FR4 material or up to about 150mmof standard FR4 with one connector.
Features
● Optical interface compliant to IEEE 802.3ae 10GBASE-LR
● Electrical interface compliant to SFF-8431
● Hot Pluggable
● 1310nm DFB transmitter, PIN photo-detector
● Low power consumption
● Applicable for 20km SMF connection
● All-metal housing for superior EMI performance
● Advanced firmware allow customer system encryption information to be stored in transceiver
● Cost effective SFP+ solution, enables higher port densities and greater bandwidth
● RoHS6 compliant (lead free)
● Case operating temperature
Commercial: 0 ~ +70℃
Industrial: -40 ~ +85℃
Applications
● 10GBASE-LR at 10.3125Gbps
● Other optical links
Mechanical Dimensions
Part Number Ordering Information
|
Part Number |
Product Description |
|
FTCS-131X-20D |
1310nm, 10Gbps, SFP+ 20km, 0ºC ~ +70ºC |
|
FTCS-131X-20DI |
1310nm, 10Gbps, SFP+ 20km, -40ºC ~ +85ºC |
注：本产品有全国产化型号可选
本产品为SFP+系列光�？�，如有需要，请联系大宝娱乐。
Important Notice
Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.
The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.
Related Products
10Gb/s SFP+ CWDM 10km 光�？椋�1270~1450）
10Gb/s SFP+ CWDM 10km 光�？�
Description
FTCS-Cxx1X(1270~1450)-DZxx SFP+ transceiver is designed for use in 10-Gigabit Ethernet links up to 10km over single mode fiber. The module consists of CWDM DFB Laser, 850nm VCSEL and Preamplifier in a high-integrated optical sub-assembly.
10Gb/s SFP+ CWDM 40km Optical Transceiver Module
10Gb/s SFP+ CWDM 40km Optical Transceiver Module
Description
FTCS-Cxx1X(1470~1610)-DZxx SFP+ transceiver is designed for use in 10-Gigabit Ethernet links up to 40km over single mode fiber. The module consists of CWDM EML Laser, 850nm VCSEL and Preamplifier in a high-integrated optical sub-assembly.
10.3125Gbps Dual Channel Optical Receiver Module
10.3125Gbps Dual Channel Optical Receiver Module
大宝娱乐专业研爆发产(全国产化可选):10.3125Gbps Dual Channel Optical Receiver Module, 10.3125Gbps Dual Channel Optical Receiver Module海量交付给国防、军工、航空、航天、武器、舰船、雷达、电子、核工业、军事、电力、铁路、医疗、交通、通信、电信、政府、国防科技工业系统内大专院校及科研院所
10G-BASE-T Copper SFP+ Transceiver
10G-BASE-T Copper SFP+ Transceiver
Description
F-tone Networks’s FTCS-10G-Txx-M Copper Small Form Pluggable Plus (SFP+) transceivers is high performance, cost effective module compliant with the 10 Gigabit Ethernet and 10G BASE-T standards as specified in IEEE 802. 3-2015 and IEEE 802.3an, which supporting 10Gbps data-rate up to 30 meters reach over shielded twisted-pair category 6A cable.
10Gbps 2km SFP+ Optical Transceiver
10Gbps 2km SFP+ Optical Transceiver
Product description
This 1310 nm FP 10Gigabit SFP+ transceiver is designed to transmit and receive optical data over single mode optical fiber for link length 2km.The SFP+ 2km module electrical interface is compliant to SFI electrical specifications. The transmitter input and receiver output impedance is 100 Ohms differential.
10Gb/s SFP+ 1310nm 10km Optical Transceiver Module
10Gb/s SFP+ 1310nm 10km Optical Transceiver Module
Description
F-tone Networks’FTCS-131X-10Dxx SFP+ transceiver is designed for use in 10-Gigabit Ethernet links up to 10km over single mode fiber. The module consists of 1310 DFB Laser, PIN and Preamplifier in a high-integrated optical sub-assembly. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472.