标准光�？�
QSFP+ to 4 SFP+ Breakout Cable Passive 0.5~5 meter
Description
Description
QSFP+ to 4x SFP+ breakout copper DAC cable, it's an application for the link with 40Gb/s rate switch to 4 upstream 10Gb/s device. bridge the gap between your 10G and 40G capable switches/host adapters. This breakout cable compliant to SFP+ & QSFP MSA, supports both 10G/40G Ethernet standards. Notice: 1. Our 40G QSFP+ DAC could not support "Aruba (HP Provurve)" devices.
- 0.5~5 meters
- 10Gb/s per channel
- 40GBase-CU4, QDR
- QSFP+ to 4 SFP+ Breakout
- Connector A: 40G QSFP+ Connector (SFF-8436)
- Connector B: (4) 10G SFP+ Connectors (SFF-8431)
- Pasive
- 30/28/26AWG
- Ethernet 10G, 40G
- InfiniBand 4X SDR, DDR, QDR
- Fiber Channel 10G, 40G
- Rapid IO
- Rack-to-Rack, Shelf-to-Shelf Interconnect
- TOR (Top of Rack)
Important Notice
Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.
The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.
Related Products
100GBase-IR4 QSFP28 CWDM4 Transceiver for SMF, 2 km
100GBase-IR4 QSFP28 CWDM4 Transceiver for SMF, 2 km
F-tone Networks’s 100G-CWDM4 optical transceiver is a high performance, pluggable, four-channel QSFP28 optical transceiver designed for linkage of 100Gbps Ethernet up to 2 km via a single mode fiber.
SFP28 AOC, 25Gbps Active Optical Cable 1~100 meter
SFP28 AOC, 25Gbps Active Optical Cable 1~100 meter
SFP28 AOC (Active Optical Cable) consists of 2x SFP28 modules and a fiber cable assembly, transmitting up to 25Gbps in each direction over a OM3 MMF with distance up to 70 meters or a OM4 MMF with distance up to 100 meters.
Active QSFP+ to 4 SFP+ Breakout Cable 3~10 meters
Active QSFP+ to 4 SFP+ Breakout Cable 3~10 meters
Active DAC design has a signal amplification and a class 4x 10G Clock and Data Recovery(CDR) or Equalizer technology to support longer distances than passive QSFP+ DAC cable.
QSFP+ 40Gb/s QDR DAC Cable Passive 0.5~5 meter
QSFP+ 40Gb/s QDR DAC Cable Passive 0.5~5 meter
QSFP+ DAC based on IEEE 802.3ba and compliant MSA SFF-8436, application in 40G Ethernet, infiniband QDR and Omni-path, suitable for very short distances transmission and offer a highly cost-effective solution to establish a 40-Gigabit link between QSFP+ ports and QSFP+ switches within racks and across adjacent racks.
QSFP+ DAC Twin Axial Nylon Braided Flat Cable, 0.5~3 meter, Passive
QSFP+ DAC Twin Axial Nylon Braided Flat Cable, 0.5~3 meter, Passive
F-tone Networks adopts 3M's twin axial cable technology to offer the flexible design which satisfies customers looking for high-quality. The core cable technology allows cable assemblies to provide system designers an extensive selection of interconnect system that enables flexible speed compatibility for applications up to 100Gbps.
Active QSFP+ DAC, Active Copper with CDR, 40Gb/s QDR,5~10 meters
Active QSFP+ DAC, Active Copper with CDR, 40Gb/s QDR,5~10 meters
Active DAC design has a signal amplification and a class 4x 10G Clock and Data Recovery(CDR) or Equalizer technology to support longer distances than passive DAC cable.