标准光�？�
100GBase-IR4 QSFP28 CWDM4 Transceiver for SMF, 2 km
Description
Description
F-tone Networks’s 100G-CWDM4 optical transceiver is a high performance, pluggable, four-channel QSFP28 optical transceiver designed for linkage of 100Gbps Ethernet up to 2 km via a single mode fiber. The data is transmitted bi-directionally with aggregate bandwidth of 100Gbps by four coarse WDM wavelength normally at 1271, 1291, 1311, and 1331nm. The optical interface is composed of a single mode optical cable with a standard duplex LC connector.
- Compliant to IEEE 802.3bm electrical specifications Clause 83E (CAUI-4)
- Compliant to CWDM4 MSA
- Compliant to QSFP28 MSA Specifications, including SFF-8665 Rev. 1.9
- Up to 2km link length over single mode fiber at 100Gbps
- Duplex LC receptacles
- Low power consumption: Max. 3.5W
- BER better than 10-12 with FEC-Off
- I²C Management Interface
- Hot pluggable electrical interface
- 0 to 70°C case temperature operating range
- Hot pluggable electrical interface
- RoHS-6 Compliant (lead-free)
- Ethernet 100G
- HPC Interconnects
Important Notice
Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.
The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.
Related Products
40Gb/s QSFP+ LR4 PSM (Parallel Single Mode) Transceiver for SMF, 10 km (MPO/MTP)
40Gb/s QSFP+ LR4 PSM (Parallel Single Mode) Transceiver for SMF, 10 km (MPO/MTP)
QSFP+ transceiver is compliant to MSA SFF-8436 40GBase-LR4, OTU3 and IEEE 802.3ba. This is a parallel 40Gb/s QSFP+ optical module, terminated with single mold MPO or MTP Connectors.
40Gbase-LX4, QSFP+ Transceiver for SMF or MMF, 2 km
40Gbase-LX4, QSFP+ Transceiver for SMF or MMF, 2 km
QSFP+ LX4 is a transceiver module designed for optical transmission applications over both MMF and SMF with transmission distances of up to 150m on MMF (OM3) and 2km on SMF.
40GBase-ER4, QSFP+ Transceiver for SMF, 40 km
40GBase-ER4, QSFP+ Transceiver for SMF, 40 km
QSFP+ transceiver is compliant to MSA SFF-8436 40GBASE-IR4, OTU3 and IEEE 802.3ba. This Quad Small Form-factor Pluggable (QSFP+) optical module ratch up to 40 km, terminated with dual LC connectors.
100GBase-SR4 QSFP28 Transceiver for MMF, 70/100 meters (MPO/MTP)
100GBase-SR4 QSFP28 Transceiver for MMF, 70/100 meters (MPO/MTP)
F-tone Networks's QSFP28 SR4 is a parallel 100Gb/s Quad Small Form-factor Pluggable (QSFP28) optical module. It provides increased port density and total system cost savings.
100GBase-LR4 QSFP28 Transceiver for SMF, 10 km
100GBase-LR4 QSFP28 Transceiver for SMF, 10 km
F-tone Networks's QSFP28 LR4 is a 100Gb/s transceiver module designed for optical communication applications compliant to 100GBASE-LR4 of the IEEE P802.3ba standard.
100GBase-PSM4 QSFP28 (Parallel Single Mode 4 lanes) for MPO/MTP SMF, 1.4 km
100GBase-PSM4 QSFP28 (Parallel Single Mode 4 lanes) for MPO/MTP SMF, 1.4 km
F-tone Networks’s FT-77-AMQ28-IR4-02 is a pluggable, four-channel QSFP28 optical transceiver with bi-directional signal transmission and aggregate 100-Gbps bandwidth for 100G Ethernet. It features the Parallel Single Mode 4 Lane (PSM4) and transmission range of up to 2 km over SMF.