标准光�？�
84Mbps DDM 1x9 SM Transceiver Module
Specifications
- 产品型号: FTTR-1301-XDX(XXXX)
- 兼容品牌: 全系列
- 封装类型: 1x9
- 传输速率: 84Mbps DDM 1x9 SM Transceiver Module
- 传输距离: 0~160km
- 发射波长: 84Mbps DDM 1x9 SM Transceiver Module
- 接收波长: 84Mbps DDM 1x9 SM Transceiver Module
- 事情温度: 商业级0℃～+70℃/工业级-40℃～+85℃ 可选
- 数字诊断: 带DDM
- 接收灵敏度: 84Mbps DDM 1x9 SM Transceiver Module
- 接收灵敏度: 84Mbps DDM 1x9 SM Transceiver Module
Description
84Mbps DDM 1x9 SM Transceiver Module
Product Features
- Multi-sourced 1 × 9 pin packaged
- 1310nm FP Laser Transmitter
- FC double receptacle
- Up to 20Km with 9/125μm SMF
- Single 3.3V or 5.0V power supply
- Digital diagnostic monitoring
- TTL signal input and output
- TTL logic level signal detect output
- Wave solderable and washable with process plug inserted
- Temperature ranges:
— -40°C to +85°C
Product Description
F-tone’sFTTR-1301-20DFI series of transceiver modules are the perfect solution for Low-speed communication networks.The transceiver modules support data rates up 2Mbps to 84 Mbps. These modules are fully compliant with the Multi-sourced 1×9 protocol.The transceiver modules suppliesthe TTL interface of 3.3V/5.0 Voltage and provide the system designer with products to implement arange of low-speed data and digital video transmission designs at the 2Mbps to 84 Mbps rate for fiber communications.
Application
- Digital Video
- PDH,SDH equipments
Absolute Maximum Ratings
Operating of the transceiver beyond the Absolute Conditions Listed in Table 1 will degrade or damage the product. It’s not implied that the product would function above the recommended operating environment, it’s possible to reduce the reliability and lifetime of device if Recommended Operating Environment is exceeded (Refer to table 2)
Table 1-- Absolute Maximum Conditions
|
Parameter |
Symbol |
Min |
Max |
Units |
|
|
Storage Temperature |
TST |
-40 |
+85 |
℃ |
|
|
Operating Temperature |
(CASE) |
TOP |
-40 |
+85 |
℃ |
|
Supply Voltage(3.3V) |
VCC3 |
0 |
+3.8 |
V |
|
|
Supply Voltage(5.0V) |
VCC5 |
0 |
+6.0 |
V |
|
|
Relative Humidity |
RH |
5 |
95 |
% |
|
|
Input voltage |
VIN |
0 |
VCC |
V |
|
|
Lead Soldering Temperature & Time |
- |
- |
260/10 |
℃/S |
|
Table 2-- Recommended Operating Environment
|
Parameter |
Symbol |
Min |
Typ |
Max |
Units |
|
|
Supply Voltage |
3.3V power |
VCC3 |
3.1 |
3.3 |
3.5 |
V |
|
Supply Voltage |
5.0V power |
VCC5 |
4.75 |
5.0 |
5.25 |
V |
|
Ambient operating Temperature |
(CASE) |
TOP |
-40 |
- |
+85 |
℃ |
|
Supply Current |
ITX+IRX |
- |
150 |
200 |
mA |
|
Optical Parameters
Table 3 FTTR-1301-20DFI Transceiver Optical and Electrical Characteristics
(Ambient Operating Temperature Ta=-25°C, VCC =5.0V)
|
Parameter |
Symbol |
Min |
Typ |
Max |
Units |
|
Transmitter |
|||||
|
Data rate |
B |
2 |
- |
84 |
-Mb/s |
|
Output Center Wavelength |
λC |
1260 |
1310 |
1360 |
nm |
|
Output Spectral width (RMS) |
λ |
- |
- |
4.0 |
nm |
|
Average Optical Output Power |
Po |
-12 |
- |
-1 |
dBm |
|
Extinction Ratio |
EXT |
10 |
- |
- |
dB |
|
Optic Output Eye: Compliant with Bellcore TR-NWT-000253 and ITU recommendation G.957 |
|||||
|
Receiver |
|||||
|
Receiver Sensitivity |
PMIN |
- |
- |
-35 |
dBm |
|
Maximum Input Power |
PMAX |
-3 |
- |
- |
dBm |
|
Signal Detect -- Asserted |
PA |
- |
- |
-35 |
dBm |
|
Signal Detect -- Deasserted |
PD |
-46 |
- |
- |
dBm |
|
Signal Detect - Hysteresis |
PHYS |
0.5 |
- |
- |
dB |
Electrical Parameters
Table 4 (Ambient Operating Temperature Ta=25°C, VCC = 5.0V)
|
Parameter |
Symbol |
Min |
Typ |
Max |
Units |
|
Transmitter |
|||||
|
Power Supply Current |
ICC |
- |
- |
100 |
mA |
|
Data Input Current - Low |
IIL |
-350 |
- |
- |
μA |
|
Data Input Current - High |
IIL |
- |
- |
350 |
μA |
|
Data Input Voltage - Low |
VIL |
- |
0.7 |
V |
|
|
Data Input Voltage - High |
VIH |
2.0 |
- |
V |
|
|
Receiver |
|||||
|
Power Supply Current |
ICC |
- |
- |
100 |
mA |
|
Data Output Voltage – Low |
VOL |
- |
0.7 |
V |
|
|
Data Output Voltage – High |
VOH |
2.0 |
- |
V |
|
|
Signal Detect Output Voltage-Low |
VOL |
- |
0.7 |
V |
|
|
Signal Detect Output Voltage-High |
VOH |
2.0 |
- |
V |
|
Digital diagnostic monitoring Characteristics
Table 5 Digital diagnostic monitoring Characteristics
|
Parameter |
Symbol |
Range |
Accuracy |
|
Transceiver Internal Temperature Accuracy |
T |
Recommended Operation Condition |
±3℃ |
|
Transceiver Internal Supply Voltage Accuracy |
VCC |
Recommended Operation Condition |
±3% |
|
Laser Bias Current Accuracy |
ID |
ID:1-100mA, Recommended Operation Condition |
±10% |
|
Tx Output Power Accuracy |
PO |
PO:-12~-1dBm, Recommended Operation Condition |
±3dBm |
|
Rx Input Power Accuracy |
PI |
PI:-35~-3dBm, Recommended Operation Condition |
±3dBm |
EPROM Serial ID Memory Contents:
Table 6Serial ID Memory Contents
|
Data Address |
Size (Byte) |
Name of Field |
Description |
|
Base ID Fields |
|||
|
0 |
1 |
Identifier |
XXX |
|
1 |
1 |
Ext. Identifier |
function is defined by serial ID only |
|
2 |
1 |
Connector |
FC Connector |
|
3-10 |
8 |
Transceiver |
Transceiver Codes |
|
11 |
1 |
Encoding |
NRZ |
|
12 |
1 |
BR, Nominal |
100Mbps |
|
13 |
1 |
Reserved |
|
|
14 |
1 |
Length(9μm)km |
Transceiver transmit distance |
|
15 |
1 |
Length(9μm)100m |
|
|
16 |
1 |
Length(50μm)10m |
|
|
17 |
1 |
Length(62.5μm)10m |
|
|
18 |
1 |
Length(Copper) |
Not compliant |
|
19 |
1 |
Reserved |
|
|
20-35 |
16 |
Vendor Name |
vendor name: F-tone |
|
36 |
1 |
Reserved |
|
|
37-39 |
3 |
Vendor OUI |
|
|
40-55 |
16 |
Vendor PN |
Part Number: “NTR-xxxxx” |
|
56-59 |
4 |
Vendor rev |
4.0 |
|
60-61 |
2 |
Wavelength |
Transceiver wavelength |
|
62 |
1 |
Reserved |
|
|
63 |
1 |
CC_BASE |
Check code for Base ID Fields |
|
Extended ID Fields |
|||
|
64-65 |
2 |
Options |
TX_FAULT, TX_DISABLE and Loss of Signal implemented. |
|
66 |
1 |
BR, max |
|
|
67 |
1 |
BR, min |
|
|
68-83 |
16 |
Vendor SN |
Serial number |
|
84-91 |
8 |
Date code |
Manufactory date code |
|
92 |
1 |
Diagnostic Monitoring Type |
Digital diagnostic monitoring implemented, “externally calibrated” is implemented, RX measurement type is “Average Power”. |
|
93 |
1 |
Enhanced Options |
Optional Alarm/Warning flags implemented for all monitored quantities, Optional Soft RX_LOS monitoring implemented. |
|
94 |
1 |
SFF-8472 Compliance |
Includes functionality described in Rev 9.3 SFF-8472. |
|
95 |
1 |
CC_EXT |
Check sum for the extended ID Fields |
|
Vendor Specific ID Fields |
|||
|
96-127 |
32 |
Vendor Specific |
Depends on customer information |
Table 7 Serial ID Memory Map: A2
|
Address |
Name of Fields |
Description |
|
0~1 |
Temperature High Alarm |
110°C |
|
2~3 |
Temperature Low Alarm |
-45°C |
|
4~5 |
Temperature High Warning |
100°C |
|
6~7 |
Temperature Low Warning |
-40°C |
|
8~9 |
VCC High Alarm |
5.5V |
|
10~11 |
VCC Low Alarm |
3.0V |
|
12~13 |
VCC High Warning |
5.4V |
|
14~15 |
VCC Low Warning |
3.1V |
|
16~17 |
Bias High Alarm |
80mA |
|
18~19 |
Bias Low Alarm |
0mA |
|
20~21 |
Bias High Warning |
70mA |
|
22~23 |
Bias Low Warning |
0mA |
|
24~25 |
TX Power High Alarm |
-3dBm |
|
26~27 |
TX Power Low Alarm |
-13dBm |
|
28~29 |
TX Power High Warning |
0dBm |
|
30~31 |
TX Power Low Warning |
-12dBm |
|
32~33 |
RX Power High Alarm |
-1dBm |
|
34~35 |
RX Power Low Alarm |
-36dBm |
|
36~37 |
RX Power High Warning |
-4dBm |
|
38~39 |
RX Power Low Warning |
-35dBm |
|
40~55 |
Reserved |
|
|
56~94 |
Calibration Coefficients |
|
|
95 |
Check Sum |
Check Sum byte for 0 to 94 |
|
96~97 |
Measured Temperature |
Scale: 1/256°C |
|
98~99 |
Measured VCC |
Scale: 100uV |
|
100~101 |
Measured Bias Current |
Scale: 2uA |
|
102~103 |
Measured TX Power |
Scale: 0.1uW |
|
104~105 |
Measured RX Power |
|
|
106~109 |
Reserved |
|
|
110 |
Optional Status/ Control Bits |
|
|
111 |
Reserved |
|
|
112~119 |
Alarm and Warning Flags |
Corresponding flags are set when internal monitoring values exceed the setting levels. |
Pin Assignment & Signal Definition
Table 8—Connector pin assignment
|
Pin # |
Pin Name |
Description |
|
1 |
Rx VEE |
Receiver Signal Ground |
|
2 |
RD+ |
Receiver Data Out |
|
3 |
SCL |
Serial Clock Line |
|
4 |
SD |
Signal Detect |
|
5 |
Rx VCC |
Receiver Power Supply |
|
6 |
Tx VCC |
Transmitter Power Supply |
|
7 |
SDA |
Serual Data Line |
|
8 |
TD+ |
Transmitter Data In |
|
9 |
Tx VEE |
Transmitter Ground |
Ordering information
|
Part Number |
Product Description |
|
FTTR-1301-20DI |
2~484Mbps DDM 1X9 SM Transceiver Module ,SC , -40?C ~ +85?C |
|
FTTR-1301-20DTI |
2~484Mbps DDM 1X9 SM Transceiver Module ,ST , -40?C ~ +85?C |
|
FTTR-1301-20DFI |
2~484Mbps DDM 1X9 SM Transceiver Module ,FC , -40?C ~ +85?C |
Important Notice
Performance figures, data and any illustrative material provided in this data sheet are typical and must bespecifically confirmed in writing by F-tone Networks before they become applicable to any particular order orcontract. In accordance with the F-tone Networks policy of continuous improvement specifications may changewithout notice.
The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.
Related Products
2.488Gbps 1x9 SM Transceiver Module
2.488Gbps 1x9 SM Transceiver Module：F-tone’s FTTR-1524XXX series of transceiver modules are the perfect solution for high-speed communication networks.The transceiver modules support data rates up to 2.488Gbps. These modules are fully compliant with the Multi-sourced 1x9 protocol.The transceiver module supplies the Differential PECL of Single 3.3V Voltage and provides the system designer with products to implement arange of Fiber Channel and SDH STM-16 and SONET OC-48 system.Business level transceiver module which operating at 0℃ to 70℃ and Industry level which operating extended temperature as -40℃ to +85℃ for available.
155Mbps 1x9 BIDI MM Transceiver Module
155Mbps 1x9 BIDI MM Transceiver Module：F-tone’s FTTR-BMxx03-02xx series of transceiver modules are the perfect solution for high-speed communication networks.The transceiver modules support data rates up to 155Mbps. These modules are fully compliant with the Multi-sourced 1x9 protocol.The transceiver module supplies the Differential PECL of3.3V, 5V, 3.3V/5.0V Voltage and provides the system designer with products to implement arange of FDDI and ATM designs at the 155Mbps rateand SONET/OC-3, SDH/STM-1 for Telecommunication.Commerce level transceiver module which operating at 0℃ to 70℃ for available.
- Operating case temperature:
Standard : 0 to +70°C
Industrial : -40 to +85°C
Low-speed Bi-Di TTL Transceiver Module
Low-speed Bi-Di TTL Transceiver Module：F-tone Networks’sFTTR-Bxx01-20xx series of transceiver modules are the perfect solution for Low-speed communication networks.The transceiver modules supplies the TTL interface of 5.0 Voltage and provide the system designer with products to implement a range of low-speed data and fiber MODEM designs at the DC 0~2Mbps rate for fiber communications.These modules are fully compliant with the Multi-sourced 1x9 protocol.The FTTR-Bxx01-20xx series is high performance module for single fiber communications by using 1310/1550nm transmitter and 1550/1310nm receiver. The transmitter section uses a multiple quantum well laser and is a class 1 laser compliant according to International Safety Standard IEC-825. The receiver section uses an integrated 1310/1550nm detector (PD) mounted in an optical header and a limiting post-amplifier IC. A TTL logic interface simplifies interface to external circuitry.
1.25Gbps Bi-Di Transceiver Module
1.25Gbps Bi-Di Transceiver Module：F-tone’s FTTR-BXX12-XX series of transceiver modules are the perfect solution for High-speed communication networks.The transceiver modules support data rates up to 1250 Mbps. These modules are fully compliant with the Multi-sourced 1x9 protocol.The FTTR-BXX12-XX series is high performance module forsingle fiber communications by using 1310nm/1550nm transmitterand 1550nm/1310 nm receiver. The transmitter section uses a DFB laser diode and is a class1 lasercompliant according to International Safety StandardIEC-825. The receiver section uses an integrated 1310nmdetector preamplifier (IDP) mounted in an optical headerand a limiting post-amplifier IC. A PECL logic interfacesimplifies interface to external circuitry.
1x9 2.5Gbps BiDi Transceiver Module
1x9 2.488Gbps Bi-Di Transceiver Module：F-tone’sFTTR-BXX24-XXX series of transceiver modules are the perfect solution for High-speed communication networks.The transceiver modules support data rates up to 2488 Mbps. These modules are fully compliant with the Multi-sourced 1x9 protocol.The FTTR-BXX24-XXX series is high performance module for single fiber communications. The transmitter section uses a DFB laser diode and is a class 1 laser compliant according to International Safety Standard IEC-825.
84Mbps/1.25Gbps Bi-DiAsymmetry Transceiver
84Mbps/1.25Gbps Bi-DiAsymmetry Transceiver Module：F-tone’sFTTR-BxxBE-20xx/FTTR-BxxEB-20xx series of transceiver modules are the perfect solution for High-speed communication networks.The transceiver modules may use different data rates (or data level)between transmitter and receiver, support data rates up to 1250 Mbps. These modules are fully compliant with the Multi-sourced 1x9 protocol.The FTTR-BxxBE-20xx/FTTR-BxxEB-20xxseries is high performance module forsingle fiber communications by using 1310nm/1550nm transmitterand 1550nm/1310nm receiver. The transmitter section uses a FP laser diode and is a class1 lasercompliant according to International Safety StandardIEC-825. The receiver section uses an integrated 1310nmdetector preamplifier (IDP) mounted in an optical headerand a limiting post-amplifier IC. A PECL logic interfacesimplifies interface to external circuitry.