±ê×¼¹âÄ£¿é
84Mbps/1.25Gbps Bi-DiAsymmetry Transceiver
Specifications
- ²úÆ·ÐͺÅ: FTTR-Bxxxx-XXX(XXXX)
- ¼æÈÝÆ·ÅÆ: ȫϵÁÐ
- ·â×°ÀàÐÍ: 1x9
- ´«ÊäËÙÂÊ: 84Mbps/1.25Gbps Bi-DiAsymmetry Transceiver Module
- ´«Êä¾àÀë: 2~160km
- ·¢É䲨³¤: 84Mbps/1.25Gbps Bi-DiAsymmetry Transceiver Module
- ½ÓÊÕ²¨³¤: 84Mbps/1.25Gbps Bi-DiAsymmetry Transceiver Module
- ÊÂÇéζÈ: ÉÌÒµ¼¶0¡æ¡«+70¡æ/¹¤Òµ¼¶-40¡æ¡«+85¡æ ¿ÉÑ¡
- Êý×ÖÕï¶Ï: ²»´øDDM
- ½ÓÊÕÁéÃô¶È: 84Mbps/1.25Gbps Bi-DiAsymmetry Transceiver Module
- ½ÓÊÕÁéÃô¶È: 84Mbps/1.25Gbps Bi-DiAsymmetry Transceiver Module
Description
84Mbps/1.25Gbps Bi-DiAsymmetry Transceiver Module
Product Description
F-tone¡¯sFTTR-BxxBE-20xx/FTTR-BxxEB-20xx series of transceiver modules are the perfect solution for High-speed communication networks.The transceiver modules may use different data rates (or data level)between transmitter and receiver, support data rates up to 1250 Mbps. These modules are fully compliant with the Multi-sourced 1x9 protocol.The FTTR-BxxBE-20xx/FTTR-BxxEB-20xxseries is high performance module forsingle fiber communications by using 1310nm/1550nm transmitterand 1550nm/1310nm receiver. The transmitter section uses a FP laser diode and is a class1 lasercompliant according to International Safety StandardIEC-825. The receiver section uses an integrated 1310nmdetector preamplifier (IDP) mounted in an optical headerand a limiting post-amplifier IC. A PECL logic interfacesimplifies interface to external circuitry.
Product Features
- Single Fiber Bi-Directional Transceiver
- 1310nm FP and 1550nm FP Laser Diode Transmitter
- Distance Up to 20km
- Industry Standard 1 x 9 Footprint
- Single 5V power supply
- Single Fiber ST/FC/SC
- 1.25Gbps PECL Differential Inputs and Outputs
- 84Mbps TTL Inputs and Outputs
- Wave Solderable and Aqueous Washable
- Class 1 Laser International Safety Standard IEC 825 Compliant
- Optical Isolation > 30 dB
- Cross Talk < -40 dB
- Operating case temperature:
Standard : 0 to +70¡ãC
Industrial : -40 to +85¡ãC
Application
- WDM 1250 Mb/s Links
- SONET/SDH Equipment Interconnect
- Digital video transmission
Absolute Maximum Ratings
Operating of the transceiver beyond the Absolute Conditions Listed in Table 1 will degrade or damage the product. It¡¯s not implied that the product would function above the recommended operating environment, it¡¯s possible to reduce the reliability and lifetime of device if Recommended Operating Environment is exceeded (Refer to table 2)
Table 1-- Absolute Maximum Conditions
|
Parameter |
Symbol |
Min |
Max |
Units |
|
Storage Temperature |
TST |
-40 |
+85 |
¡æ |
|
Operating Temperature |
TOP |
0 |
+70 |
¡æ |
|
Supply Voltage |
VCC |
0 |
+6 |
V |
|
Output Current |
IO |
0 |
30 |
mA |
|
Relative Humidity |
RH |
5 |
95 |
% |
|
Input voltage |
VIN |
0 |
VCC |
V |
|
Lead Soldering Temperature & Time |
- |
- |
260/10 |
¡æ/S |
Table 2-- Recommended Operating Environment
|
Parameter |
Symbol |
Min |
Typ |
Max |
Units |
|
|
Supply Voltage |
5.5V power |
VCC |
4.75 |
5.0 |
5.25 |
V |
|
Ambient operating Temperature(CASE) |
TOP |
0 |
- |
+70 |
¡æ |
|
|
Supply Current |
ITX+IRX |
- |
150 |
200 |
mA |
|
Optical Parameters
Table 3 FTTR-B13EB-20xx Asymmetry Transceiver Optical and Electrical Characteristics
(Ambient Operating Temperature Ta=0¡ãC to +70¡ãC, V CC = 4.75 to 5.25V)
|
Parameter |
Symbol |
Min |
Typ |
Max |
Units |
|
Transmitter |
|||||
|
Data rate |
B |
- |
1250 |
- |
Mb/s |
|
Output Center Wavelength |
¦Ëc |
1260 |
1310 |
1360 |
nm |
|
Output Spectral width (RMS) |
¦Ë |
- |
- |
3.0 |
nm |
|
Average Optical Output Power |
Po |
-10 |
- |
-3 |
dBm |
|
Extinction Ratio |
EXT |
9 |
- |
- |
dB |
|
Optic Output Eye: Compliant withIEEE802.3z eye masks when filtered |
|||||
|
Receiver |
|||||
|
Data rate |
B |
- |
84 |
- |
Mb/s |
|
Receiver Sensitivity |
PMIN |
- |
- |
-35 |
dBm |
|
Maximum Input Power |
PMAX |
-3 |
- |
- |
dBm |
|
Signal Detect -- Asserted |
PA |
- |
- |
-35 |
dBm |
|
Signal Detect -- Deasserted |
PD |
-47 |
- |
- |
dBm |
|
Signal Detect - Hysteresis |
PHYS |
1.0 |
- |
4.0 |
dB |
Table 4 FTTR-B15BE-20xx Asymmetry Transceiver Optical and Electrical Characteristics
(Ambient Operating Temperature Ta=0¡ãC to +70¡ãC, V CC = 4.75 to 5.25V)
|
Parameter |
Symbol |
Min |
Typ |
Max |
Units |
|
Transmitter |
|||||
|
Data rate |
B |
- |
84 |
- |
Mb/s |
|
Output Center Wavelength |
¦Ëc |
1480 |
1550 |
1580 |
nm |
|
Output Spectral width (RMS) |
¦Ë |
- |
- |
4.0 |
nm |
|
Average Optical Output Power |
Po |
-12 |
- |
-1 |
dBm |
|
Extinction Ratio |
EXT |
10 |
- |
- |
dB |
|
Optic Output Eye: Compliant with Bellcore TR-NWT-000253 and ITU recommendation G.957 |
|||||
|
Receiver |
|||||
|
Data rate |
B |
- |
1250 |
- |
Mb/s |
|
Receiver Sensitivity |
PMIN |
- |
- |
-23 |
dBm |
|
Maximum Input Power |
PMAX |
-3 |
- |
- |
dBm |
|
Signal Detect -- Asserted |
PA |
- |
- |
-23 |
dBm |
|
Signal Detect -- Deasserted |
PD |
-33 |
- |
- |
dBm |
|
Signal Detect - Hysteresis |
PHYS |
1.0 |
- |
4.0 |
dB |
Electrical Parameters
Table 5 (Ambient Operating Temperature Ta=0¡ãC to +70¡ãC, VCC= 3.1 to 3.5V) PECL
|
Parameter |
Symbol |
Min |
Typ |
Max |
Units |
|
Transmitter |
|||||
|
Power Supply Current |
ICC |
- |
- |
100 |
mA |
|
Data Input Current - Low |
IIL |
-350 |
- |
- |
¦ÌA |
|
Data Input Current - High |
IIH |
- |
- |
350 |
¦ÌA |
|
Data Input Voltage - Low |
VIL |
VCC-1.810 |
- |
VCC-1.475 |
V |
|
Data Input Voltage - High |
VIH |
VCC-1.616 |
- |
VCC-0.880 |
V |
|
Receiver |
|||||
|
Power Supply Current |
ICC |
- |
- |
100 |
mA |
|
Data Output Voltage ¨C Low |
VOL |
VCC-1.840 |
- |
VCC-1.620 |
V |
|
Data Output Voltage ¨C High |
VOH |
VCC-1.045 |
- |
VCC-0.880 |
V |
|
Signal Detect Output Voltage-Low |
VOL |
VCC-1.840 |
- |
VCC-1.620 |
V |
|
Signal Detect Output Voltage-High |
VOH |
VCC-1.045 |
- |
VCC-0.880 |
V |
Table 6 (Ambient Operating Temperature Ta=0¡ãC to +70¡ãC, VCC = 4.75 to 5.25V) TTL
|
Parameter |
Symbol |
Min |
Typ |
Max |
Units |
|
Transmitter |
|||||
|
Power Supply Current |
ICC |
- |
- |
50 |
mA |
|
Data Input Current - Low |
IIL |
-350 |
- |
- |
¦ÌA |
|
Data Input Current - High |
IIL |
- |
- |
350 |
¦ÌA |
|
Data Input Voltage - Low |
VIL |
- |
0.7 |
V |
|
|
Data Input Voltage - High |
VIH |
2.0 |
- |
V |
|
|
Receiver |
|||||
|
Power Supply Current |
ICC |
- |
- |
100 |
mA |
|
Data Output Voltage ¨C Low |
VOL |
- |
0.7 |
V |
|
|
Data Output Voltage ¨C High |
VOH |
2.0 |
- |
V |
|
|
Signal Detect Output Voltage-Low |
VOL |
- |
0.7 |
V |
|
|
Signal Detect Output Voltage-High |
VOH |
2.0 |
- |
V |
|
Pin Assignment & Signal Definition
Table 7¡ªConnector pin assignment PECL/TTL
|
Pin # |
Pin Name |
Description |
|
1 |
Rx VEE |
Receiver Signal Ground |
|
2 |
RD+ |
Receiver Data Out |
|
3 |
NC |
NC |
|
4 |
SD |
Signal Detect |
|
5 |
Rx VCC |
Receiver Power Supply |
|
6 |
Tx VCC |
Transmitter Power Supply |
|
7 |
TD- |
Transmitter Data In Bar |
|
8 |
TD+ |
Transmitter Data In |
|
9 |
Tx VEE |
Transmitter Ground |
Table 8¡ªConnector pin assignment TTL/PECL
|
Pin # |
Pin Name |
Description |
|
1 |
Rx VEE |
Receiver Signal Ground |
|
2 |
RD+ |
Receiver Data Out |
|
3 |
RD- |
Receiver Data Out Bar |
|
4 |
SD |
Signal Detect |
|
5 |
Rx VCC |
Receiver Power Supply |
|
6 |
Tx VCC |
Transmitter Power Supply |
|
7 |
NC |
NC |
|
8 |
TD+ |
Transmitter Data In |
|
9 |
Tx VEE |
Transmitter Ground |
Regulatory Compliance
F-tone NetworksOptical transceiver is designed to be Class I Laser safety compliant and is certified per the following standards:
|
Feature |
Agency |
Standard |
|
Laser Safety |
FDA |
CDRH 21 CFR 1040 annd Laser Notice No. 50 |
|
Product Safety |
BST |
EN 60825-1£º2007 EN 60825-2£º2004 EN 60950-1£º2006 |
|
Environmental protection |
SGS |
RoHS Directive 2002/95/EC |
|
EMC |
WALTEK |
EN 55022:2006+A1:2007 EN 55024:1998+A1+A2:2003 - |
Ordering information
|
Part Number |
Product Description |
|
FTTR-B13EBH-20 |
1x9-BIDI-T1310/R1550-T1.25G/R84M-5V-PECL-SD:PECL-20KM-SC;0 to +70¡ãC |
|
FTTR-B15BEH-20 |
1x9-BIDI-R1310/T1550-R1.25G/T84M-5V-PECL-SD:PECL-20KM-SC;0 to +70¡ãC |
|
FTTR-B13EBH-20F |
1x9-BIDI-T1310/R1550-T1.25G/R84M-5V-PECL-SD:PECL-20KM-FC;0 to +70¡ãC |
|
FTTR-B15BEH-20F |
1x9-BIDI-R1310/T1550-R1.25G/T84M-5V-PECL-SD:PECL-20KM-FC;0 to +70¡ãC |
|
FTTR-B13EBH-20T |
1x9-BIDI-T1310/R1550-T1.25G/R84M-5V-PECL-SD:PECL-20KM-ST;0 to +70¡ãC |
|
FTTR-B15BEH-20T |
1x9-BIDI-R1310/T1550-R1.25G/T84M-5V-PECL-SD:PECL-20KM-ST;0 to +70¡ãC |
|
FTTR-B13EBH-20I |
1x9-BIDI-T1310/R1550-T1.25G/R84M-5V-PECL-SD:PECL-20KM-SC;-40 to +85¡ãC |
|
FTTR-B15BEH-20I |
1x9-BIDI-R1310/T1550-R1.25G/T84M-5V-PECL-SD:PECL-20KM-SC;-40 to +85¡ãC |
|
FTTR-B13EBH-20FI |
1x9-BIDI-T1310/R1550-T1.25G/R84M-5V-PECL-SD:PECL-20KM-FC;-40 to +85¡ãC |
|
FTTR-B15BEH-20FI |
1x9-BIDI-R1310/T1550-R1.25G/T84M-5V-PECL-SD:PECL-20KM-FC;-40 to +85¡ãC |
|
FTTR-B13EBH-20TI |
1x9-BIDI-T1310/R1550-T1.25G/R84M-5V-PECL-SD:PECL-20KM-ST;-40 to +85¡ãC |
|
FTTR-B15BEH-20TI |
1x9-BIDI-R1310/T1550-R1.25G/T84M-5V-PECL-SD:PECL-20KM-ST;-40 to +85¡ãC |
|
40KM/80KM/120KM Customized Transceivers,Please contact our sales |
|
|
SD:TTL Customized Transceivers,Please contact our sales |
|
|
3.3V Customized Transceivers,Please contact our sales |
|
AsymmetryRate Note:
A£ºDC0~2M
B£º2~84M
C£º155M
D£º622M
E£º1.25G
F£º2.5G
G£º3G
Important Notice
Performance figures, data and any illustrative material provided in this data sheet are typical and must bespecifically confirmed in writing by F-TONE NETWORKS before they become applicable to any particular order orcontract. In accordance with the F-TONE NETWORKS policy of continuous improvement specifications may changewithout notice. The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-TONE NETWORKS or others. Further details are available from any F-TONE NETWORKS sales representative.
Related Products
3Gbps/155Mbps Bi-DiAsymmetry Transceiver Module
3Gbps/155Mbps Bi-DiAsymmetry Transceiver Module:F-tone¡¯s FTTR-1XU9-20/40X HD series of transceiver modules are the perfect solution for High-speed communication networks.The transceiver modules may use different data rates (or data level)between transmitter and receiver, support data rates up to 3 Gbps. These modules are fully compliant with the Multi-sourced 1¡Á9 protocol.The FTTR-1XU9-20/40Xseries is high performance module forsingle fiber communications by using 1310nm/1550nm transmitterand 1550nm/1310nm receiver. The transmitter section uses a DFB(or FP) laser diode and is a class1 lasercompliant according to International Safety StandardIEC-825. The receiver section uses an integrated 1310nmdetector preamplifier (IDP) mounted in an optical headerand a limiting post-amplifier IC. A LVPECL/CML logic interfacesimplifies interface to external circuitry.
2.488Gbps 1x9 SM Transceiver Module
2.488Gbps 1x9 SM Transceiver Module£ºF-tone¡¯s FTTR-1524XXX series of transceiver modules are the perfect solution for high-speed communication networks.The transceiver modules support data rates up to 2.488Gbps. These modules are fully compliant with the Multi-sourced 1x9 protocol.The transceiver module supplies the Differential PECL of Single 3.3V Voltage and provides the system designer with products to implement arange of Fiber Channel and SDH STM-16 and SONET OC-48 system.Business level transceiver module which operating at 0¡æ to 70¡æ and Industry level which operating extended temperature as -40¡æ to +85¡æ for available.
155Mbps 1x9 BIDI MM Transceiver Module
155Mbps 1x9 BIDI MM Transceiver Module£ºF-tone¡¯s FTTR-BMxx03-02xx series of transceiver modules are the perfect solution for high-speed communication networks.The transceiver modules support data rates up to 155Mbps. These modules are fully compliant with the Multi-sourced 1x9 protocol.The transceiver module supplies the Differential PECL of3.3V, 5V, 3.3V/5.0V Voltage and provides the system designer with products to implement arange of FDDI and ATM designs at the 155Mbps rateand SONET/OC-3, SDH/STM-1 for Telecommunication.Commerce level transceiver module which operating at 0¡æ to 70¡æ for available.
- Operating case temperature:
Standard : 0 to +70¡ãC
Industrial : -40 to +85¡ãC
Low-speed Bi-Di TTL Transceiver Module
Low-speed Bi-Di TTL Transceiver Module£ºF-tone Networks¡¯sFTTR-Bxx01-20xx series of transceiver modules are the perfect solution for Low-speed communication networks.The transceiver modules supplies the TTL interface of 5.0 Voltage and provide the system designer with products to implement a range of low-speed data and fiber MODEM designs at the DC 0~2Mbps rate for fiber communications.These modules are fully compliant with the Multi-sourced 1x9 protocol.The FTTR-Bxx01-20xx series is high performance module for single fiber communications by using 1310/1550nm transmitter and 1550/1310nm receiver. The transmitter section uses a multiple quantum well laser and is a class 1 laser compliant according to International Safety Standard IEC-825. The receiver section uses an integrated 1310/1550nm detector (PD) mounted in an optical header and a limiting post-amplifier IC. A TTL logic interface simplifies interface to external circuitry.
1.25Gbps Bi-Di Transceiver Module
1.25Gbps Bi-Di Transceiver Module£ºF-tone¡¯s FTTR-BXX12-XX series of transceiver modules are the perfect solution for High-speed communication networks.The transceiver modules support data rates up to 1250 Mbps. These modules are fully compliant with the Multi-sourced 1x9 protocol.The FTTR-BXX12-XX series is high performance module forsingle fiber communications by using 1310nm/1550nm transmitterand 1550nm/1310 nm receiver. The transmitter section uses a DFB laser diode and is a class1 lasercompliant according to International Safety StandardIEC-825. The receiver section uses an integrated 1310nmdetector preamplifier (IDP) mounted in an optical headerand a limiting post-amplifier IC. A PECL logic interfacesimplifies interface to external circuitry.
1x9 2.5Gbps BiDi Transceiver Module
1x9 2.488Gbps Bi-Di Transceiver Module£ºF-tone¡¯sFTTR-BXX24-XXX series of transceiver modules are the perfect solution for High-speed communication networks.The transceiver modules support data rates up to 2488 Mbps. These modules are fully compliant with the Multi-sourced 1x9 protocol.The FTTR-BXX24-XXX series is high performance module for single fiber communications. The transmitter section uses a DFB laser diode and is a class 1 laser compliant according to International Safety Standard IEC-825.