CWDM-10G-XFP-10-29

    CWDM-10G-XFP-10-29 is Multi-Vendor MSA Compatible XFP (10 Gigabit Small Form Factor Pluggable Module) Transceiver, operating over Double Fiber CWDM Single-Mode Fiber (SMF) optical cable. It has minimum guaranteed optical budget of 9 dB, with in most cases is enough to reach about 10 km distance. 

CWDM-10G-XFP-10-33

    CWDM-10G-XFP-10-33 is Multi-Vendor MSA Compatible XFP (10 Gigabit Small Form Factor Pluggable Module) Transceiver, operating over Double Fiber CWDM Single-Mode Fiber (SMF) optical cable. It has minimum guaranteed optical budget of 9 dB, with in most cases is enough to reach about 10 km distance. 

CWDM-10G-XFP-10-37

    CWDM-10G-XFP-10-37 is Multi-Vendor MSA Compatible XFP (10 Gigabit Small Form Factor Pluggable Module) Transceiver, operating over Double Fiber CWDM Single-Mode Fiber (SMF) optical cable. It has minimum guaranteed optical budget of 9 dB, with in most cases is enough to reach about 10 km distance. 

Four Lambda 10G / 1G Symmetrical Quadplexer XFP 10G EPON OLT Transceiver

The FT-BE-H5302 is a combination of 10G EPON OLT and 1G EPON OLT optical transceivers in an XFP housing.The 10G bidirectional link is configured with 1270nm/1577nm optics and the 1G link is configured with 1310nm/1490nm optics.

F-tone series multi-rate 8G/10G XFP transceiver is designed for serial optical data communications such as 8G Fiber Channel and 10G/11.1G speed rates. Abailable in TDM XFP, CWDM XFP, BIDI XFP, DWDM XFP. Customized model design is available on request.

The F-tone DWDM tunable XFP 10 Gbps multiprotocol optical transceiver is an integrated fiber optic transceiver that provides a high-speed serial link at signaling rates from 9.95 Gbps to 11.1 Gbps. The module complies with the 10 Gigabit small form factor pluggable (XFP) multisource agreement (MSA).

XFP Electrical Loopbacks from F-tone provides a method for port operation testing in board, hub, system and applications. The XFP Loopback supports various 10G application standards, it is capable of achieving up to 10Gbps data transfer rate. The dual integrated LED indicator light ensures the loopback is properly seated, powered and performance status.

F-tone XFP Host Test Boards are designed to provide an efficient and easy method of programming and testing XFP Electrical Loopbacks and Transceivers.

XFP Transceiver 10GBase-ER 10Gb/s DWDM, 40KM

F-tone Networks's DWDM XFP 40/80km Small Form Factor 10Gb/s transceivers comply with the current XFP Multi-Source Agreement (MSA) Specification. They support DWDM 10Gb/s SONET/SDH, DWDM 10-Gigabit Ethernet and 10-Gigabit Fibre Channel applications. 

XFP Transceiver 10GBase-ER10Gb/s CWDM, 40KM

F-tone Networks's CWDM XFP transceiver series is designed for single-mode fiber serial optical data communications such as 10G Ethernet 10GBASE-ER/EW/ZR, SDH/SONET, and 10G Fibre Channel 1200-SM-LL-L. 

XFP Transceiver 10GBase-SR 850nm, 300M

F-tone Networks's FT-77-XF85-192-M3 transceiver is a multi-purpose optical transceiver module for 10Gb/s data transmission applications at 850nm. It is ideally suited for 10 GbE datacom and storage area network(SAN/NAS) applications based on the IEEE 802.3ae and Fibre Channel standards.

XFP Transceiver 10GBase-ZR 10Gb/s DWDM, 80KM

F-tone Networks's DWDM XFP 40/80km Small Form Factor 10Gb/s transceivers comply with the current XFP Multi-Source Agreement (MSA) Specification. They support DWDM 10Gb/s SONET/SDH, DWDM 10-Gigabit Ethernet and 10-Gigabit Fibre Channel applications.

XFP-CABLE-XX Copper XFP Cable assemblies are high-performance, cost effective I/O solutions for 10 GB Ethernet and 10G Fiber Channel applications. XFP copper modules allow hardware manufacturers to achieve high port density, configurability and utilization at a very low cost and to reduce power budget.

XFP,10Gb/s,BiDi, 10GBase-LR, SMF, Tx1270/Rx1330nm, 20KM

The XFP module is compliant with the 10G Small Form-Factor Pluggable (XFP) Multi-Source Agreement (MSA), supporting data-rate of 8.0~11.1Gbps, and transmission distance up to 20km on SMF.

     Supports 9.95Gb/s to 11.1Gb/s bit rates
     Hot-pluggable XFP footprint
     Maximum link length of 10km with SMF
     1310nm Uncooled DFB laser
     XFP MSA package with duplex LC connector
     No reference clock required
     Compatible with RoHS
     +3.3V +1.8V power supply
     Power dissipation <2.5W
     Built-in digital diagnostic functions
     Operating temperature: 0¡ãC to 70¡ãC(Standard), -40¡ãC to 85¡ãC (Industrial)

Features
     Supports 10GBE Application at the Data-Rate of  9.953Gbps to 10.3125Gbps
     Maximum link length of 40km with SMF
     1550nm cooled EML laser and PIN photodiode
     XFP MSA package with duplex LC connector
     XFI High Speed Electrical Interface
     +5V, +3.3V,+1.8V power supply
     Low Power Dissipation 3.5W Maximum
     2-wire interface for management and diagnostic monitor
     Compatible with RoHS
     Compatible with IEEE 802.3ae 10 Gigabit Ethernet
     Compatible with Sonet OC-192/SDH STM-64

     Supports 9.95Gbps to 10.5Gbps bit rates
     Maximum link length of 300m (50um,MMF,2000MHz.Km)
     850nm VCSEL laser and PIN receiver
     Low power consumption <1.5W
     +3.3V +1.8Vpower supply
     XFP MSA package with duplex LC connector
     XFI electrical interface
     No reference clock required
     Compatible with RoHS
     Excelllent EMI performance
     Built-in digital diagnostic functions
     Temperature range: 0¡æ to +70¡æ
     High reliability

XG PON N1 OLT XFP Transceiver

The F-tone NetworksFT-PLGX1-01A transceiver consists 1577nm DFB EML laser, 1270nm APD photodiode WDM filter and Preamplifier in a high-integrated optical sub-assembly for 2.5G upstream and 10G downstream GPON applications up to 20km. 

XGSPON OLT XFP 20km

XGSPON OLT,20km,Tx 1577nm 9.953G,Rx 1270nm 9.953G,XFPÍâÐÎ,SC / UPC²å×ùÁ¬½ÓÆ÷¡£ XGSPON±ê×¼,XFPÐÍOLTÊÕ·¢Æ÷Ä
£¿é£¨GNTP-27299-XSCD£©¡£