SFP+ LR Lite Transceiver 10GBase-LR 1310nm, 2KM

Product Description
F-tone Networks's series single mode transceiver is small form factor pluggable module for serial optical data communications such as IEEE 802.3ae 10GBASE-LR/LW. It is with the SFP+ 20-pin connector to allow hot plug capability. This module is designed for single mode fiber and operates at a nominal wavelength of 1310nm. The transmitter section uses 1310nm multiple quanta well FP laser and is a class 1laser compliant according to International Safety Standard IEC-60825. The receiver section uses an integrated InGaAs detector preamplifier (IDP) mounted in an optical header and a limiting post-amplifier IC.

Features:
¡ñ Operating data rate up to 11.3Gbps
¡ñ 1310nm FP-LD Transmitter Distance up to 2km
¡ñ Single 3.3V Power supply and TTL Logic Interface
¡ñ Duplex LC Connector Interface
¡ñ Hot PluggablePower Dissipation < 1.0W
¡ñ Compliant with MSA SFP+ Specification SFF-8431
¡ñ Compliant with IEEE 802.3ae 10GBASE-LR/LW
¡ñ Operating Case Temperature
¡ñ Standard: 0¡æ~+70¡æ
¡ñ Industrial: -40¡æ~+85¡æ

Applications:
¡ñ 10GBASE-LR at 10.31Gbps
¡ñ 10GBASE-LW at 9.95Gbps
¡ñ OBSAI rates 6.144 Gb/s, 3.072 Gb/s,
¡ñ 1.536 Gb/s, 0.768Gb/sCPRI rates 9.830 Gb/s,7.373Gb/s, 6.144 Gb/s, 4.915 Gb/s, 2.458 Gb/s,
¡ñ 1.229 Gb/s, 0.614Gb/s
¡ñ Other optical links

Order Information:

Important Notice

Performance figures,data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone before they become applicable to any particular order or contract. In accordance with the F-tone policy of continuous improvement specifications may change without notice.

The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone or others. Further details are available from any F-tone sales representative.