兼容光� ？�
Optical Transmit and Receive Subassemblies
Specifications
- 接收灵敏度: 40KM
- 接收灵敏度: 40KM
Description
Optical Transmit and Receive Subassemblies
Avago’s 100Gb/s PM-QPSK Integrated Coherent Receiver integrates signal and local oscillator polarization splitters, two matched 90° optical hybrids, four high speed balanced detector pairs and four differential in/out linear TIAs with manual and automatic gain control in a single compact surface-mount package.
| 资料速率：100 Gb/s | |
|---|---|
| 产品类别：Various | |
| 光纤样式：Single Mode | |
| 标称光波长 (nm)：1550 |
特征描述：
简单封装完整集成 PMQPSK 相干光接收器功效
-
- 偏振分束器 (PBS, Polarization Beam Splitter)
- 90° 光混淆器 (相干混波器)
- 平衡式光检测器
- 线性差分输入/输出 TIA
- 可选择 AGC 自动增益控制或手动控制
- 波特率可达 13GBd
- 封装电气和机构规格切合 OIF-DPC-RX 标准
- 事情温度规模：-5°C 到 80°C
- 无须主动温度控制
- 提供 C 频段、L 频段和 C L 频段选择
Related Products
AFBR-2CARxxZ
AFBR-2CARxxZ
The Avago AFBR-2CARxxZ Active Optical Cable (AOC) is part of a family of SFP+ products to serve 10Gb Ethernet (10GbE) applications. The letters “xx” of the part number AFBR-2CARxxZ denote the cable length in meters. The AFBR-2CARxxZ enables 10GbE equipment designs with very high port density based on the electrical and mechanical specification enhancements to the well known SFP specifications developed by the SFF committee. The specifications are referred to as “SFP+” to represent the enhancements over previous SFP specifications. The SFP+ AOCs have a cable length up to 20m. These AOCs can be used as an alternative solution to SFP+ passive and active copper cables, while providing improved signal integrity, longer reach, superior electromagnetic immunity and better bit error rate performance
AFBR-83EDxxZ
AFBR-83EDxxZ
The Avago AFBR-83EDxxZ is a pluggable 10-channel, parallel optics CXP Active Optical Cable (AOC) for multi-channel 10Gbps proprietary interconnect and 100 Gigabit Ethernet (100GbE) applications.
The AFBR-83EDxxZ is designed to operate over multimode fiber systems using a nominal wavelength of 850 nm. The electrical interface uses an 84-contact edge type connector. The AOC incorporates Avago Technologies' proven integrated circuit and VCSEL technology to provide reliable long life, high performance, and consistent service.
AFBR-83CDxxZ
AFBR-83CDxxZ
AFBR-79Q2EKZ
AFBR-8420EVK
AFBR-8420EVK
The Avago AFBR-8420EVK evaluation kit is designed to provide designers with a convenient means of evaluating Avago 100G CFP2 SR10 module. The evaluation kit supports the Avago AFBR-8420Z, a 10-channel pluggable, multi-mode parallel optic transceiver module for high-density 100G Ethernet and Optical Transport Network (OTN) applications.
AFBR-7705EKZ
AFBR-7705EKZ
The purpose of this evaluation kit is to provide designers with a convenient way to evaluate the AFBR-775BxxxZ/785BxxxZ pluggable parallel fiber optic modules. The application note describes the details of the evaluation kit , AFBR-7705EKZ (Transmitter Board) and AFBR-7805EKZ (Receiver Board) as well as some recommended test configurations and equipment that should be used during module evaluation.