±ê×¼¹âÄ£¿é
CWDM XFP 40KM
Specifications
- ²úÆ·ÐͺÅ: FTCX-CXX1X-40X
- ¼æÈÝÆ·ÅÆ: ȫϵÁÐ
- ·â×°ÀàÐÍ: XFP
- ´«ÊäËÙÂÊ: 10G
- ´«Êä¾àÀë: 40KM
- ·¢É䲨³¤: CWDM
- ½ÓÊÕ²¨³¤: CWDM
- ÊÂÇéζÈ: ÉÌÒµ¼¶0¡æ¡«+70¡æ/¹¤Òµ¼¶-40¡æ¡«+85¡æ ¿ÉÑ¡
- Êý×ÖÕï¶Ï: ´øDDM
- ½ÓÊÕÁéÃô¶È: 40KM
- ½ÓÊÕÁéÃô¶È: 40KM
Description
40KM CWDM XFP Optical Transceiver
Features
- Wavelength selectable to ITU-T standards covering CWDM grid wavelengths
- XFP MSA Compliant
- data rate from 9.95 Gbps to 11.3Gbps
- No Reference Clock required
- Cold EML transmitter and PIN receiver
- link length up to 40km (800ps/nm)
- Low Power Dissipation 3.5W Maximum
- Operating Case Temperature 0¡ãC to 70¡ãC(Standard), -40¡ãC to 85¡ãC (Industrial)
- Diagnostic Performance Monitoring of module temperature, supply Voltages, laser bias current, transmit optical power, receive optical power
- RoHS compliant and lead free
Applications
- SONET OC-192&SDH STM 64
- 40 km 10G Fiber Channel
- CWDM Networks
Description
F-tone CWDM XFP 40KM Transceiver exhibits excellent wavelength stability, cost effective module. It is designed for 10G CWDM SDH, 10GBASE-ER/EW and 10G Fiber- Channel applications.
The transceiver consists of two sections: The transmitter section incorporates a colded EML laser. And the receiver section consists of a PIN photodiode integrated with a TIA. All modules satisfy class I laser safety requirements. F-tone CWDM XFP 40km transceiver provides an enhanced monitoring interface, which allows real-time access to device operating parameters such as transceiver temperature, laser bias current, transmitted optical power, received optical power and transceiver supply voltage.
Pin Descriptions
|
Pin |
Logic |
Symbol |
Name/Description |
Ref. |
|
1 |
GND |
Module Ground |
1 |
|
|
2 |
VEE5 |
Optional ¨C5.2 Power Supply ¨C Not required |
||
|
3 |
LVTTL-I |
Mod-Desel |
Module De-select; When held low allows the module to , respond to 2-wire serial interface commands |
|
|
4 |
LVTTL-O |
Interrupt |
Interrupt (bar); Indicates presence of an important condition which can be read over the serial 2-wire interface |
2 |
|
5 |
LVTTL-I |
TX_DIS |
Transmitter Disable; Transmitter laser source turned off |
|
|
6 |
VCC5 |
+5 Power Supply |
||
|
7 |
GND |
Module Ground |
1 |
|
|
8 |
VCC3 |
+3.3V Power Supply |
||
|
9 |
VCC3 |
+3.3V Power Supply |
||
|
10 |
LVTTL-I |
SCL |
Serial 2-wire interface clock |
2 |
|
11 |
LVTTL- I/O |
SDA |
Serial 2-wire interface data line |
2 |
|
12 |
LVTTL-O |
Mod_Abs |
Module Absent; Indicates module is not present. Grounded in the module. |
2 |
|
13 |
LVTTL-O |
Mod_NR |
Module Not Ready; |
2 |
|
14 |
LVTTL-O |
RX_LOS |
Receiver Loss of Signal indicator |
2 |
|
15 |
GND |
Module Ground |
1 |
|
|
16 |
GND |
Module Ground |
1 |
|
|
17 |
CML-O |
RD- |
Receiver inverted data output |
|
|
18 |
CML-O |
RD+ |
Receiver non-inverted data output |
|
|
19 |
GND |
Module Ground |
1 |
|
|
20 |
VCC2 |
+1.8V Power Supply |
||
|
21 |
LVTTL-I |
P_Down/RST |
Power Down; When high, places the module in the low power stand-by mode and on the falling edge of P_Down initiates a module reset |
|
|
Reset; The falling edge initiates a complete reset of the module including the 2-wire serial interface, equivalent to a power cycle. |
||||
|
22 |
VCC2 |
+1.8V Power Supply |
||
|
23 |
GND |
Module Ground |
1 |
|
|
24 |
PECL-I |
RefCLK+ |
Reference Clock non-inverted input, AC coupled on the host board ¨C Not required |
3 |
|
25 |
PECL-I |
RefCLK- |
Reference Clock inverted input, AC coupled on the host board ¨C Not required |
3 |
|
26 |
GND |
Module Ground |
1 |
|
|
27 |
GND |
Module Ground |
1 |
|
|
28 |
CML-I |
TD- |
Transmitter inverted data input |
|
|
29 |
CML-I |
TD+ |
Transmitter non-inverted data input |
|
|
30 |
GND |
Module Ground |
1 |
Notes:
1. Module circuit ground is isolated from module chassis ground within the module.
2. Open collector; should be pulled up with 4.7k ¨C 10k ohms on host board to a voltage between 3.15Vand 3.6V.
3. A Reference Clock input is not required.
¶©»õÐÅÏ¢/Ordering information :
| Part No. | Description |
| FTCX-CXX1X-40 | CWDM XFP 40km, XX(X)=differentcablelengths,0¡ãC to 70¡ãC |
| FTCX-CXX1X-40I | CWDM XFP 40km, XX(X)=differentcablelengths, -40¡ãC to 85¡ãC |
ÏàÓ¦µÄ´«Ê䲨³¤ÓЦËc Wavelength Guide
| Channel Product Code | Wavelength | 40Channel Product Code | Wavelength | Channel Product Code | Wavelength |
| 27 | 1270nm | 29 | 1290nm | 31 | 1310nm |
| 33 | 1330nm | 35 | 1350nm | 37 | 1370nm |
| 39 | 1390nm | 41 | 1410nm | 43 | 1430nm |
| 45 | 1450nm | 47 | 1470nm | 49 | 1490nm |
| 51 | 1510nm | 53 | 1530nm | 55 | 1550nm |
| 57 | 1570nm | 59 | 1590nm | 61 | 1610nm |
Related Products
XFP-850¶àÄ£¹âÄ£¿é
Supports 9.95Gbps to 10.5Gbps bit rates
Maximum link length of 300m (50um,MMF,2000MHz.Km)
850nm VCSEL laser and PIN receiver
Low power consumption <1.5W
+3.3V +1.8Vpower supply
XFP MSA package with duplex LC connector
XFI electrical interface
No reference clock required
Compatible with RoHS
Excelllent EMI performance
Built-in digital diagnostic functions
Temperature range: 0¡æ to +70¡æ
High reliability
XFP-10KM¹âÄ£¿é
Supports 9.95Gb/s to 11.1Gb/s bit rates
Hot-pluggable XFP footprint
Maximum link length of 10km with SMF
1310nm Uncooled DFB laser
XFP MSA package with duplex LC connector
No reference clock required
Compatible with RoHS
+3.3V +1.8V power supply
Power dissipation <2.5W
Built-in digital diagnostic functions
Operating temperature: 0¡ãC to 70¡ãC(Standard), -40¡ãC to 85¡ãC (Industrial)
XFP-40KM ¹âÄ£¿é
Features
Supports 10GBE Application at the Data-Rate of 9.953Gbps to 10.3125Gbps
Maximum link length of 40km with SMF
1550nm cooled EML laser and PIN photodiode
XFP MSA package with duplex LC connector
XFI High Speed Electrical Interface
+5V, +3.3V,+1.8V power supply
Low Power Dissipation 3.5W Maximum
2-wire interface for management and diagnostic monitor
Compatible with RoHS
Compatible with IEEE 802.3ae 10 Gigabit Ethernet
Compatible with Sonet OC-192/SDH STM-64
XFP-80KM¹âÄ£¿é
Features
XFP MSA Compliant
data rate from 9.95 Gbps to 11.1Gbps
No Reference Clock required
Cold Start up Wavelength Compliance
EML transmitter and APD receiver
link length up to 80km
Low Power Dissipation 3.5W Maximum
Operating Case Temperature£ºÉÌÒµ¼¶0¡æ¡«+70¡æ/¹¤Òµ¼¶-40¡æ¡«+85¡æ ¿ÉÑ¡
Diagnostic Performance Monitoring of module temperature, supply Voltages, laser bias current, transmit optical power, receive optical power
RoHS compliant and lead free
BiDi XFP 10KM
BiDi XFP 10kmµ¥ÏËË«ÏòÍòÕ×¹âÄ£¿é£¬Ö§³Ö10G´«ÊäËÙÂÊ£¬·¢É䲿·Ö½ÓÄɵͲü¶¶¡¢¸ßÐÔ ÄÜµÄ 1330nm/1270nm DFB¼¤¹â×é¼þ(1330/1270ÄÉÃײ¨³¤)£¬¿ÉÖ§³Ö×î´ó´«Êä¾àÀë10km ¡£Ö§³ÖÈȲå°Î£¬µ¥ÏËË«Ïò´«Ê䣬´ø Êý×ÖÕï¶Ï¼à¿Ø¹¦Ð§£¬Ö§³ÖÉÌÒµ¼¶Î¶ȹæÄ££¨ 0¡ãC to 70¡ãC(Standard), -40¡ãC to 85¡ãC (Industrial)£© ¡£ Ö÷ÒªÓ¦ÓÃÔÚ10GBASE LR EthernetÒÔÌ«Íø£¬10G LW Fibre Channel¹âÏËͨµÀµÈÁìÓò ¡£
- Supports 9.95Gb/s to 11.1Gb/s bit rates
- Hot-pluggable XFP footprint
- Maximum link length of 10km with SMF
- 1270/1330nm DFB laser Transmitter and 1330/1270nm Receiver
- XFP MSA package with LC connector
- No reference clock required
- Loop Back Support.
- +3.3V£¬+1.8V power supply
- Power dissipation <2W
- Compatible with RoHS
- Built-in digital diagnostic functions
- Temperature range:0¡ãC to 70¡ãC(Standard), -40¡ãC to 85¡ãC (Industrial)
CWDM XFP 10KM
- Supports 9.95Gb/s to 11.1Gb/s bit rates
- Hot-pluggable XFP footprint
- Maximum link length of 10km with SMF
- 4-Wavelengths Uncooled CWDM DFB laser from1270nm to 1330nm, with Step 20nm
- XFP MSA package with duplex LC connector
- No reference clock required
- Compatible with RoHS
- +3.3V power supply
- Power dissipation <2.5W
- Built-in digital diagnostic functions
- Temperature range 0¡ãC to 70¡ãC(Standard), -40¡ãC to 85¡ãC (Industrial)