标准光�？�
CWDM SFP+ 10G 40KM
Specifications
- 产品型号: FTCS-CXX1X-40X
- 兼容品牌: 全系列
- 封装类型: SFP+
- 传输速率: 10G
- 传输距离: 40KM
- 发射波长: CWDM
- 接收波长: CWDM
- 事情温度: 商业级0℃～+70℃/工业级-40℃～+85℃ 可选
- 数字诊断: 带DDM
- 接收灵敏度: 40KM
- 接收灵敏度: 40KM
Description
40KM SFP+ CWDM Optical Transceiver
Features
- Compliant with SFF-8431 and IEE802.3ae
- Data rate selectable ≤4.25Gbps or 9.95Gbps to 10.3Gbps bit rates
- Cooled EML transmitter and PIN receiver
- Wavelength selectable to ITU-T standards covering CWDM grid wavelengths
- link length up to 40km
- Low Power Dissipation 1.5W Maximum
- Operating Case Temperature:0°C to 70°C(Standard), -40°C to 85°C (Industrial)
- Single 3.3V power supply
- Diagnostic Performance Monitoring of module temperature, supply Voltages, laser bias current, transmit optical power, receive optical power
- RoHS compliant and lead free
Applications
- 10GBASE-ER/EW (with/without FEC)
- 10G Fiber Channel (with/without FEC)
Description
F-tone SFP+ER CWDM Transceiver is designed for 10GBASE-ER/EW, and 8.5G/10G Fiber- Channel applications.
The transceiver consists of two sections: The transmitter section incorporates a colded EML laser. And the receiver section consists of a PIN photodiode integrated with a TIA. All modules satisfy class I laser safety requirements. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472, which allows real-time access to device operating parameters such as transceiver temperature, laser bias current, transmitted optical power, received optical power and transceiver supply voltage.
Transmitter Specifications – Optical
|
Parameter |
Symbol |
Min |
Typical |
Max |
Unit |
|
Center Wavelength |
lc |
1464.5 |
1617.5 |
nm |
|
|
Center wavelength stability |
DlD |
-6.5 |
lc |
6.5 |
nm |
|
Optical Average Power |
Po |
0 |
- |
+3 |
dBm |
|
Optical OMA Power |
Pom |
-2.1 |
dBm |
||
|
Side Mode Suppression Ratio |
SMSR |
30 |
- |
- |
dB |
|
Optical Transmit Power (disabled) |
PTX_DISABLE |
- |
- |
-30 |
dBm |
|
Extinction Ratio |
ER |
8.2 |
- |
dB |
|
|
RIN21OMA [1] |
-128 |
dB/Hz |
|||
|
Optical Return Loss Tolerance |
21 |
dB |
Notes:
[1] RIN measurement is made with a return loss at 21 dB.
Receiver Specifications – Optical
|
Parameter |
Symbol |
Min |
Typical |
Max |
Unit |
|
Input Operating Wavelength |
λ |
1260 |
- |
1620 |
nm |
|
Average receive power |
- |
- |
-1.0 |
dBm |
|
|
Receiver sensitivity in OMA |
- |
- |
-14.1 |
dBm |
|
|
Stressed receiver sensitivity in OMA[1] |
-11.3 |
dBm |
|||
|
Maximum Input Power |
RX-overload |
- |
- |
-1 |
dBm |
|
Reflectance |
Rrx |
- |
- |
-27 |
dB |
|
Loss of Signal Asserted |
-25 |
- |
- |
dBm |
|
|
LOS De-Asserted |
- |
- |
-16 |
dBm |
|
|
LOS Hysteresis |
0.5 |
- |
- |
dB |
Notes:
[1] Measured with conformance test signal for BER = 10–12.The stressed sensitivity values in the table are for system level BER measurements which include the effects of CDR circuits. It is recommended that at least 0.4 dB additional margin be allocated if component level measurements are made
without the effects of CDR circuits.
订货信息/Ordering information :
| Part No. | Description |
| FTCS-CXX1X-40 | CWDM SFP+ 10G 40km, XX(X)=differentcablelengths,0°C to 70°C |
| FTCS-CXX1X-40I | CWDM SFP+ 10G 40km, XX(X)=differentcablelengths, -40°C to 85°C |
相应的传输波长有λc Wavelength Guide
| Channel Product Code | Wavelength | 40Channel Product Code | Wavelength | Channel Product Code | Wavelength |
| 27 | 1270nm | 29 | 1290nm | 31 | 1310nm |
| 33 | 1330nm | 35 | 1350nm | 37 | 1370nm |
| 39 | 1390nm | 41 | 1410nm | 43 | 1430nm |
| 45 | 1450nm | 47 | 1470nm | 49 | 1490nm |
| 51 | 1510nm | 53 | 1530nm | 55 | 1550nm |
| 57 | 1570nm | 59 | 1590nm | 61 | 1610nm |
Related Products
SFP+ 850nm多模光�？�
- Hot-pluggable SFP+ footprint
- Supports rate selectable 1.25 Gb/sOr 9.95 to 10.3 Gb/s bit rates
- Power dissipation < 1W
- RoHS-6 compliant ( lead-free )
- Single 3.3V power supply
- Maximum link length of 300m on2000 MHZ-km MMF
- Uncooled 850nm VCSEL laser
- Receiver limiting electrical interface
- Duplex LC Connector
- Built-in digital diagnostic functions
- Commercial temperature range： 0°C to 70°C(Standard), -40°C to 85°C (Industrial)
10Gbps SFP+ 10KM单模光�？�
- Optical interface compliant to IEEE 802.3ae 10GBASE-LR
- Electrical interface compliant to SFF-8431
- Hot Pluggable
- 1310nm DFB transmitter, PIN photo-detector
- Operating case temperature: 0°C to 70°C(Standard), -40°C to 85°C (Industrial)
- Low power consumption
- Applicable for 10km SMF connection
- All-metal housing for superior EMI performance
- Advanced firmware allow customer system encryption information to be stored in transceiver
- Cost effective SFP+ solution, enables higher port densities and greater bandwidth
BiDi SFP+ 10G 10km
BiDi SFP+ 10G 10km单纤双向万兆光�？�，支持10G传输速率，发射部分接纳低颤抖、高性 能的 1330nm/1270nm DFB激光组件(1330/1270纳米波长)，可支持最大传输距离10km。支持热插拔，单纤双向传输，带 数字诊断监控功效，支持商业级温度规模（ 0°C to 70°C(Standard), -40°C to 85°C (Industrial)）。 主要应用在10GBASE LR Ethernet以太网，10G LW Fibre Channel光纤通道等领域。
BiDi SFP+ 10G 20km
- Supports 9.95Gb/s to 10.3Gb/s data rates
- Simplex LC Connector Bi-Directional SFP+ Optical Transceiver
- Single 3.3V Supply
- Up to 20km on 9/125um SMF
- A:1270nm DFB Laser transmitter,1330nm receiver
- B:1330nm DFB Laser transmitter,1270nm receiver
- Compliant with IEEE 802.3ae 10GBASE-LRand 10GBASE-LW
- SFP+ MSA SFF-8431 Compliant
- Digital Diagnostic SFF-8472 Compliant
- RoHS compliant and Lead Free
- Operating case temperature:0°C to 70°C(Standard), -40°C to 85°C (Industrial)
CWDM SFP+ 10G 10KM
- Optical interface compliant to IEEE 802.3ae 10GBASE-LR
- Electrical interface compliant to SFF-8431
- Hot Pluggable
- 18-Wavelengths CWDMDFB transmitter from1270nm to 1610nm, PIN photo-detector
- Operating case temperature: 0°C to 70°C(Standard), -40°C to 85°C (Industrial)
- Low power consumption
- Applicable for 10km SMF connection
- All-metal housing for superior EMI performance
- Advanced firmware allow customer system encryption information to be stored in transceiver
- Cost effective SFP+ solution, enables higher port densities and greater bandwidth
8G CWDM SFP+
- Up to 8.5Gb/s data links
- Hot Pluggable SFP+ footprint
- 18-Wavelengths CWDMDFB transmitter from 1270nm to 1610nm, PIN photo-detector
- Transmission distance up to 10km/20KM/40km/80KM/120km on 9/125 μm SMF
- Digital Status monitoring Interface
- Duplex LC connector
- RoHS compliant and Lead Free
- Metal enclosurefor lower EMI
- Single 3.3V power supply
- Operating case temperature: 0°C to 70°C(Standard), -40°C to 85°C (Industrial)
- Compliant with FC-PI-4 800-Mx-SN-I, SFF-8431 , SFF-8432 and SFF-8472