The FT-D3180-203 use a high-performance GaAs PIN photo-detector packaged with a transimpedance amplifier designed to meet performance requirements for data rates up to 4.25Gbps data communication over multi-mode optical fiber at 850nm. Applications include Ethernet, Fiber Channel and ATM protocols. The optical assembly is designed to interface either 50µm or 62.5µm multi-mode fiber.

The photodetector is designed to exhibit an optimized frequency response in both power and phase. It is ideally suited for OC-768/STM-256 long haul systems. The high power capability of up to 10 dBm allows for use of optical amplification at the detector input, and results in a high output voltage swing of up to 1V avoiding the need for electrical amplification. The photodetector is optimized for dual operations at 1310 nm and 1550 nm.

A waveguide integrated pin diode provides an excellent linearity, high responsivity and a superior flatness of the RF response. An integrated biasing guarantees a highly reliable component.

The FT-DV is a compact module that is based on an advanced waveguide photodetector chip integrated with a Bias-Tee. The HP-PD utilizes a mode-converting tapered waveguide for efficient fiber-to-chip coupling and a 1×4 Multi-Mode Interference (MMI) Coupler. The optical signal is split by the MMI coupler into 4 equal parts and then it is fed into an array of 4 photodiodes which are connected in-parallel. It has a responsivity of 0.52 A/W @ 1550 nm and a high saturation photocurrent of 35 mA @ 20 GHz. The HP-PD is capable of delivering 6 dBm RF output power @ 20 GHz and 3 dBm @ 50 GHz. The device exhibits a high linearity with typical OIP3 values above 20 dBm at a frequency of 40 GHz.

5Chs 8°FA-LC

• ´ó±¦ÓéÀÖרҵÑб¬·¢²ú:5Chs 8°FA-LC, ÊÇÒ»¼ÒרҵµÄ5Chs 8°FA-LC³§¼Ò,¾ßÓÐÓÅÖʵÄ5Chs 8°FA-LCÆ·ÖÊ,ÓкܺõÄ5Chs 8°FA-LC¼Û¸ñ,5Chs 8°FA-LCº£Á¿½»¸¶¸ø¹ú·À¡¢¾ü¹¤¡¢º½¿Õ¡¢º½Ìì¡¢ÎäÆ÷¡¢½¢´¬¡¢À×´ï¡¢µç×Ó¡¢ºË¹¤Òµ¡¢¾üÊ¡¢µçÁ¦¡¢Ìú·¡¢Ò½ÁÆ¡¢½»Í¨¡¢Í¨ÐÅ¡¢µçÐÅ¡¢Õþ¸®¡¢¹ú·À¿Æ¼¼¹¤ÒµÏµÍ³ÄÚ´óרԺУ¼°¿ÆÑÐÔºËù

The 60mw 1550nm pulse laser module has a maximum output power of 60mw due to the use of a DFB or FP chip.Its high performance makes it ideal for use in OTDR systems.

F Type pin Applicable Power 1-2mw
M Type pin Applicable Power 1-5mw
N Type pin Applicable Power 5-20 mw

The maximum output power of the 650nm pigtailed laser diode module can reach 20 mw, which is widely used in light sources and instruments.Different types of fibers and connectors can be customized based on customers' needs.

The 80mw1550nm pulse laser module uses an internationally known brand name chip, and features a maximum output power of 100mw.It is widely used in OTDR systems.

F-tone Networks can offer 850nm laser diode components with different output power,which are generally used in light source detection or instruments.We provide coaxial pigtail packages or receptacle packages according to customer needs.

The FT-D6x80-418 uses a high-performance GaAs PIN photo-detector packaged with a transimpedance amplifier designed to meet performance requirements for 10Gbps data communication over multi-mode optical fiber at 850nm. Applications include Ethernet, Fiber Channel and ATM protocols. The optical assembly is designed to interface either 50mm or 62.5mm multi-mode fiber.
The FT-D6x80-418 is designed to be paired with Advanced Optical Components FT-E6x9x VCSEL 10Gbps TOSA products (see data sheets for FT-E6x9x products).

The FT-E6x92-x61 uses a high-performance Vertical Cavity Surface Emitting Laser (VCSEL) designed to meet performance requirements for 10Gbps data communication over multimode optical fiber. Applications include Ethernet, Fibre Channel and ATM protocols. The optical assembly is designed to interface either 50µm or 62.5µm multimode fiber and ensure launch conditioning requirements compatibility with enhanced bandwidth fiber as specified by TIA 455-203.
The FT-E6x92-x61 incorporates a power monitoring photodiode that can be used for temperature compensation, average power control, and for compliance with Class 1 eye safety limits.

The FT-E408x-321 is a high radiance VCSEL designed to convert electrical current into optical power that can be used in fiber optic communications and other applications. As the current varies above threshold, the light intensity increases proportionally.

The FT-E408x-321 is designed to be used with inexpensive silicon or gallium arsenide detectors (see HFD3081-103, HFD3081-108), but excellent performance can also be achieved with some indium gallium arsenide detectors.

The FT-E408x-322 is a high radiance VCSEL designed to convert electrical current into optical power that can be used in fiber optic
communications and other applications. As the current varies above threshold, the light intensity increases proportionally.

The FT-E408x-322 is designed to be used with inexpensive silicon or gallium arsenide detectors, but excellent performance can also be achieved with some indium gallium arsenide detectors.

F-tone Networks can offer 980nm pigtailed laser diode components with different output power,which are generally used in light source detection or instruments.We provide coaxial pigtail packages or receptacle packages according to customer needs.

The FT-E6x92-x61 uses a high-performance Vertical Cavity Surface Emitting Laser (VCSEL) designed to meet performance requirements for 10Gbps data communication over multimode optical fiber. Applications include Ethernet, Fibre Channel and ATM protocols. The optical assembly is designed to interface either 50µm or 62.5µm multimode fiber and ensure launch conditioning requirements compatibility with enhanced bandwidth fiber as specified by TIA 455-203.
The FT-E6x92-x61 incorporates a power monitoring photodiode that can be used for temperature compensation, average power control, and for compliance with Class 1 eye safety limits.

The CWDM diode laser module is comprised of an uncooled quantum well DFB laser chip,built-in InGaAs monitor photodiode,4-pin coaxial pigtail type or plug-in type package,single-mode fiber coupling device,SC/APC or FC/APC optical connector,and built-in optical isolator.Its light source covers a wide wavelength range from 1270nm to 1610nm,totaling 18 wavelengths.Other typical values for the CWDM diode laser module are ±3nm for the spectral range, spectral bandwidth less than 0.2nm, maximum operating current 35MA,and output power range from 1MW to 3MW.This series of product is most commonly used in the WDM light source and communication systems,CWDM analog communication systems,CATV return-path transmission systems,and other analog transmission systems.

F-tone Networks's Free Space Isolators are used in various TOSAs, which require isolation to prevent feedback into the laser.  This product is available in single and double stage designs.  The Free Space Isolators offer excellent performance with low insertion loss and high isolation.  F-tone Networks’s proprietary bonding process, combined with years of volume manufacturing experience, results in a high reliability record.  Bare isolator chips survive more than 5,000 hours of damp heat testing without delamination.

LWDM MuxDemux×é¼þ

• ´ó±¦ÓéÀÖרҵÑб¬·¢²ú:LWDM MuxDemux×é¼þ, ÊÇÒ»¼ÒרҵµÄLWDM MuxDemux×é¼þ³§¼Ò,¾ßÓÐÓÅÖʵÄLWDM MuxDemux×é¼þÆ·ÖÊ,ÓкܺõÄLWDM MuxDemux×é¼þ¼Û¸ñ,LWDM MuxDemux×é¼þº£Á¿½»¸¶¸ø¹ú·À¡¢¾ü¹¤¡¢º½¿Õ¡¢º½Ìì¡¢ÎäÆ÷¡¢½¢´¬¡¢À×´ï¡¢µç×Ó¡¢ºË¹¤Òµ¡¢¾üÊ¡¢µçÁ¦¡¢Ìú·¡¢Ò½ÁÆ¡¢½»Í¨¡¢Í¨ÐÅ¡¢µçÐÅ¡¢Õþ¸®¡¢¹ú·À¿Æ¼¼¹¤ÒµÏµÍ³ÄÚ´óרԺУ¼°¿ÆÑÐÔºËù

PSM8×é¼þ

´ó±¦ÓéÀÖרҵÑб¬·¢²ú:PSM8×é¼þ, ÊÇÒ»¼ÒרҵµÄPSM8×é¼þ³§¼Ò,¾ßÓÐÓÅÖʵÄPSM8×é¼þÆ·ÖÊ,ÓкܺõÄPSM8×é¼þ¼Û¸ñ,PSM8×é¼þº£Á¿½»¸¶¸ø¹ú·À¡¢¾ü¹¤¡¢º½¿Õ¡¢º½Ìì¡¢ÎäÆ÷¡¢½¢´¬¡¢À×´ï¡¢µç×Ó¡¢ºË¹¤Òµ¡¢¾üÊ¡¢µçÁ¦¡¢Ìú·¡¢Ò½ÁÆ¡¢½»Í¨¡¢Í¨ÐÅ¡¢µçÐÅ¡¢Õþ¸®¡¢¹ú·À¿Æ¼¼¹¤ÒµÏµÍ³ÄÚ´óרԺУ¼°¿ÆÑÐÔºËù