±ê×¼¹âÄ£¿é
CFP Single 40GBASE-SR4 Optical Module
Specifications
- ²úÆ·ÐͺÅ: CFP-40G-BSR4X
- ¼æÈÝÆ·ÅÆ: ȫϵÁÐ
- ·â×°ÀàÐÍ: CFP
- ´«ÊäËÙÂÊ: specification for 40GBASE-SR4 links
- ´«Êä¾àÀë: specification for 40GBASE-SR4 links
- ·¢É䲨³¤: 850nm
- ½ÓÊÕ²¨³¤: 850nm
- ÊÂÇéζÈ: ÉÌÒµ¼¶0¡æ¡«+70¡æ/¹¤Òµ¼¶-40¡æ¡«+85¡æ ¿ÉÑ¡
- Êý×ÖÕï¶Ï: ´øDDM
- ½ÓÊÕÁéÃô¶È: specification for 40GBASE-SR4 links
- ½ÓÊÕÁéÃô¶È: specification for 40GBASE-SR4 links
Description
CFP Single 40GBASE-SR4 / OTU3 Parallel Optical Module
pictureThe F-toneSingle port 40 Gbps short reach Ethernet CFP transceiver module provides significant system cost and power savings while maintaining form factor compatibility with longer reach optics. The F-tone40GE CFP module is compliant to the CFP MSA standard as well as the IEEE 802.3ba specification for 40GBASE-SR4 links. The F-toneCFP modules¡¯ MPO optical receptacle connects to industry standard 12 fiber multi-mode cable. The 40G port is also interoperable with a QSFP transceiver.
F-tone hot-pluggable CFP modules offer 4 transmit and 4 receive asynchronous channels operating at up to 11.2 Gbps per channel. These modules are designed for short reach applications (1m to 100m). The transmitter side of the module consists of an array of VCSELs (Vertical Cavity Surface Emitting Lasers) and associated circuitry, which converts 4 parallel electrical data inputs to 4 parallel optical data output signals. The receiver side converts 4 parallel optical signals into 4 parallel electrical signals through an array of PIN photodiodes and associated circuitry.
The CFP modules have been designed to meet the harshest external operating conditions including temperature, humidity and EMI interference using F-tone¡¯ next generation, F-tone packaging technology. The modules offer very high functionality and feature integration, accessible via an MDIO interface.
For further information, contact sales at sales@F-tone.com
Specifications and Features Highlights:
- CFP MSA compliant
- Compliant to IEEE 802.3ba specification for 40GBASE-SR4 links
- Low profile hot Z-pluggable parallel transceiver (pluggable into CFP cage through front panel of system equipment)
- MDIO digital diagnostic and control capabilities; compliant to CFP MSA Management Interface Specification, Draft 1.4.
- Aggregate Bandwidth of >40 Gbps
- TX input and RX output CDR retiming
- Up to 11.2 Gbps per channel bandwidth, OTU3 compliant
- Independent channel timing
- QSFP inter-operable
- Next Generation, F-tone VCSEL/PD array optical sub-assembly technology
- Single +3.3V power supply through 148 pin electrical connector
- Power class 1 (<8W max)
- CML compatible electrical I/O
- Capable of over 300m transmission on high bandwidth 50?m multi-mode fiber cables
Applications:
- Data center aggregation and router interfaces
- Test equipment
Related Products
CFP-100G-SR10
- Transmission data rate up to 11.2Gbit/s per channel
- CFP MSA compliant
- Compliant to IEEE 802.3ba specification for 100GBASE-SR10 links
- Up to 11.2 Gbps per channel bandwidth,
- OTU4 compatible
- 10 channels 850nm VCSEL array
- 10 channels PIN photo detector array
- OM3 Multimode Fiber cable of up to 300m and OM4 Multimode Fiber cable of up to 400m
- MDIO digital diagnostic and control capabilities.
- compliant to CFP MSA Management Interface Specification, Draft 1.4
- TX input and RX output CDR retiming
- Hot pluggable electrical interface
- Power class 1 (<8W max)
- Operating case temperature 0¡ãC to +70¡ãC
- 3.3V power supply
- RoHS 6 compliant(lead free)
100G Ethernet 10km CFP Optical Transceiver Module
F-tone¡¯s CFP-100G-LR4 100GE CFP transceiver modules are designed for use in 100 Gigabit Ethernet links over single mode fiber. They are compliant with the CFP MSA and IEEE 802.3ba 100GBASE-LR4. Digital diagnostics functions are available via an MDIO interface, as specified by the CFP MSA and F-tone Application Note AN-2080. The transceiver is RoHS-6 compliant and lead-free per Directive 2002/95/EC, and F-tone Application Note AN-2033.
CFP 100GBASE-LR4 module
F-tone CFP 100GBASE-LR4 module supports a link length of 10 kilometers on standard single-mode fiber (SMF, G.652). 100 Gigabit Ethernet signal is carried over four wavelengths. Multiplexing and demultiplexing of the four wavelengths are managed within the device.
CFP4 Optical Transceiver
This CFP Multi-Source Agreement (MSA) defines the CFP4 form factor of an optical transceiver which can support 40Gbit/s and 100Gbit/s interfaces for Ethernet, ITU-T OTN and other applications. Specifications provided in this document are given as a ¡°delta¡± to the CFP MSA Hardware Specification Rev.1.4 or the CFP2 Hardware Specification Rev. 1.0.
CFP 100GBASE-SR10 OTU4 Parallel Optical Module
CFP 100GBASE-SR10 / OTU4 Parallel Optical Module:Designed to support the IEEE 100GBASE-SR10 link specification; the newly developed F-tone 100G CFP transceiver provides increased port density and total system cost savings. The F-tone CFP module has a single MPO port which connects to an industry standard 2x12 multi-mode fiber cable. One 2x12 multi-mode optical fiber cable terminated with MPO optical connectors connects two CFP modules.
CFP Dual 40GBASE-SR4 OTU3 Parallel Optical Module
CFP Dual 40GBASE-SR4 / OTU3 Parallel Optical Module:pictureDesigned to support the IEEE 40GBASE-SR4 link specification; the newly developed F-tone Dual 40G CFP transceiver offers 2 independent 40G Ethernet links in one CFP slot. The F-tone CFP transceiver has two MPO ports which connect to industry standard 12-fiber multi-mode fiber cable. Both MPO ports will inter-operate with equipment using 40GBASE-SR4 QSFP transceivers.