兼容光� ？�
AFBR-83EVK
Description
AFBR-83EVK
The Avago AFBR-83EVK evaluation kit is designed to provide designers with a convenient means of evaluating the electrical and optical performance of Avago CXP and CXP AOC fiber optic transceiver modules. A downloadable user guide is available upon request, which provides full description of the evaluation kit and graphical user interface (GUI) along with basic operating instructions. The evaluation kit includes the following (excluding the CXP transceiver modules):
- An AFBR-83EVB Eval Board
- A CD Containing Customer User Interface Software
- iPort I2C Communication Interface for Control and Digital Diagnostics Monitoring
- Access Probe Points to Low Speed Signals (i.e., Int_L, Reset_L)
- 24 Surface-mounted SMA Connectors to Connect to 12 Differential Rx High Speed Lanes
- 24 Side-mounted SMA Connectors to Connect to 12 Differential Tx High Speed Lanes
A list of Avago CXP and CXP AOC products supported by the evaluation kit includes (but is not limited to) the following:
- AFBR-83EDZ (10x10G CXP)
- AFBR-83PDZ (12x10G CXP)
- AFBR-83CDZ (12x12.5G CXP)
- AFBR-83EDxxZ (10x10G CXP AOC)
- AFBR-83PDxxZ (12x10G CXP AOC)
- AFBR-83CDxxZ (12x12.5G CXP AOC)
Related Products
AFBR-77D1SZ
AFBR-78D13SZ
AFBR-77D13SZ
The optical interface requires a user to provide a custom designed optical turn 1×12 ribbon cable PRIZM LightTurn connector.
AFBR-2CARxxZ
AFBR-2CARxxZ
The Avago AFBR-2CARxxZ Active Optical Cable (AOC) is part of a family of SFP+ products to serve 10Gb Ethernet (10GbE) applications. The letters “xx” of the part number AFBR-2CARxxZ denote the cable length in meters. The AFBR-2CARxxZ enables 10GbE equipment designs with very high port density based on the electrical and mechanical specification enhancements to the well known SFP specifications developed by the SFF committee. The specifications are referred to as “SFP+” to represent the enhancements over previous SFP specifications. The SFP+ AOCs have a cable length up to 20m. These AOCs can be used as an alternative solution to SFP+ passive and active copper cables, while providing improved signal integrity, longer reach, superior electromagnetic immunity and better bit error rate performance
AFBR-83EDxxZ
AFBR-83EDxxZ
The Avago AFBR-83EDxxZ is a pluggable 10-channel, parallel optics CXP Active Optical Cable (AOC) for multi-channel 10Gbps proprietary interconnect and 100 Gigabit Ethernet (100GbE) applications.
The AFBR-83EDxxZ is designed to operate over multimode fiber systems using a nominal wavelength of 850 nm. The electrical interface uses an 84-contact edge type connector. The AOC incorporates Avago Technologies' proven integrated circuit and VCSEL technology to provide reliable long life, high performance, and consistent service.
AFBR-83CDxxZ
AFBR-83CDxxZ