AFBR-821vx3Z
´ó±¦ÓéÀÖרҵÑб¬·¢²ú¼æÈÝ°²»ª¸ßAFBR-821vx3Z,Avago AFBR-821vx3Z,°²»ª¸ßAFBR-821vx3Z¹âÄ£¿é,Avago AFBR-821vx3Z¹âÄ£¿é,°²»ª¸ßAFBR-821vx3Z¹âÏËÄ£¿é,Avago AFBR-821vx3Z¹âÏËÄ£¿é,°²»ª¸ßAvago AFBR-821vx3Z¹âÄ£¿é,°²»ª¸ßAvago AFBR-821vx3Z¹âÏËÄ£¿é£¬100%ÍêÃÀ¼æÈÝ°²»ª¸ßAvago AFBR-821vx3Z¹âÄ£¿é:µçÆø²ÎÊý¼æÈÝ£¬¹âѧ²ÎÊý¼æÈÝ¡£
The Avago AFBR-821vx3Z is a 12-channel pluggable, parallel fiber optics receiver module device that supports 12x10G bandwidth with OM3 link distance up to 300 meters. The AFBR-811vx3Z and AFBR-821vx3Z are a Tx/Rx module pair optimized for short-range parallel multi-lane data communication and interconnect applications. The high density optical modules are designed to operate over multimode fiber systems using a nominal wavelength of 850 nm. These MiniPOD devices can support 300m 10GBASE-SR with Avago SFP+ transceivers over OM3 fiber.
Avago's MiniPOD solution offers system designers two module package options to optimize their cable management and board layout. The AFBR-811RxyZ Tx and AFBR-821RxyZ Rx are used with round multi-lane cable assemblies for applications requiring multiple turns of the jumper cable inside the chassis. The AFBR-811FxyZ Tx and AFBR-821FxyZ Rx are used with flat ribbon cable assemblies, allowing dense tiling of the modules as the jumper cables can be thread under the dust-cap of the next module. This top mounted optical connection maximizes board layout density by eliminating board space lost to the optical connector and strain relief.
The electrical interface uses a 9×9 MEG-Array connector with 1.27 mm pitch:
Important Notice
Performance figures,data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone before they become applicable to any particular order or contract. In accordance with the F-tone policy of continuous improvement specifications may change without notice.
The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone or others. Further details are available from any F-tone sales representative.