兼容光�？�
AFBR-821FxyZ
Description
AFBR-821FxyZ
The AFBR-821FxyZ are a set of 12-channel, pluggable, parallel fiber optics trasmitter and receiver modules optimized for short-range parallel multi-lane data communication and interconnect applications. These high-speed, high density optical modules are designed to operate over multimode fiber systems using a nominal wavelength of 850 nm.
Avago’s MiniPOD solution offers system designers two module package options to optimize their cable management and board layout. AFBR-821FxyZ Rx is used with round multi-lane cable assemblies for applications requiring multiple turns of the jumper cable inside the chassis. AFBR-821FxyZ Rx is used with flat ribbon cable assemblies, allowing dense tiling of the modules as the jumper cables can be thread under the dust-cap of the next module. This top mounted optical connection maximizes board layout density by eliminating board space lost to the optical connector and strain relief.
The electrical interface uses a 9×9 MEG-Array connector with 1.27 mm The optical interface requires the user to provide a custom designed optical turn 1×12 ribbon cable PRIZM LightTurn connector. The thermal interface provided can require either a user provided heat sink or use of the Avago general purpose clip on heat sink, to maintain the module case temperature to be between 0 °C to 70 °C
Related Products
AFBR-83EDxxZ
AFBR-83EDxxZ
The Avago AFBR-83EDxxZ is a pluggable 10-channel, parallel optics CXP Active Optical Cable (AOC) for multi-channel 10Gbps proprietary interconnect and 100 Gigabit Ethernet (100GbE) applications.
The AFBR-83EDxxZ is designed to operate over multimode fiber systems using a nominal wavelength of 850 nm. The electrical interface uses an 84-contact edge type connector. The AOC incorporates Avago Technologies' proven integrated circuit and VCSEL technology to provide reliable long life, high performance, and consistent service.
AFBR-83CDxxZ
AFBR-83CDxxZ
AFBR-79Q2EKZ
AFBR-8420EVK
AFBR-8420EVK
The Avago AFBR-8420EVK evaluation kit is designed to provide designers with a convenient means of evaluating Avago 100G CFP2 SR10 module. The evaluation kit supports the Avago AFBR-8420Z, a 10-channel pluggable, multi-mode parallel optic transceiver module for high-density 100G Ethernet and Optical Transport Network (OTN) applications.
SFP Extender Board
SFP Extender Board
The SFP extender board was designed to access SFP low speed control signals while a DUT SFP compliant to SFF-8074 is plugged into the target application system such as a network switch and router.