兼容光�？�
AFBR-79EAPZ
Description
AFBR-79EAPZ
The Avago AFBR-79EAPZ is a 4-channel QSFP+ pluggable optical transceiver module device with an integrated push-pull tab for 40 Gigabit Ethernet (40GbE) and InfiniBand applications. The device is a high performance transceiver for short-range multi-lane data communication and interconnect applications. It integrates four data lanes in each direction with 40 Gbps aggregate bandwidth. Each lane can operate at 10.3125 Gbps up to 100 m using OM3 fiber or 150 m using OM4 fiber. These modules support 4x10G InfiniBand (IB) quadruple data rate (40G-IB-QDR) application and is backward compatible to the 4x5G IB dual data rate (20G-IB-DDR) and 4x2.5G IB single data rate (10G-IB-SDR) applications as well.
- 切合 IEEE 802.3ba D3.2 划定的 40GBASE-SR4 和 nPPI 规格，并且支持 40G-IB-QDR／20G-IB-DDR／10G-IB-SDR 应用
- 切合行业标准 SFF-8436 QSFP+ 规格修订版本 3.5
- 功率品级 1：最高功耗低于 1.5 瓦
- 高端口密度：21 毫米水平端口间距
- 推拉式拉环：便当�？椴迦牒屠�
- 每个通道可在 10.3125 Gb/s 速率下进行运作，并兼容 64b/66b 编码数据以实现 40 千兆应用并可在高达 10 Gb/s 的速率下运行，并且兼容 8b/10b 编码数据以实现 40G-IB-QDR 应用
- 使用 OM3 光纤链路可达 100 米，而使用 OM4 光纤则可达 150 米
- 凭据 IEEE 802.3ae 标准支持与 10GBASE-SR �？榻泄庋Щゲ僮餍�，可是接收器过载的 10G �？楸匦胛值执� 2.4 毫瓦分贝输入光纤功率
- 0°C 到 +85°C 的外壳事情温度规模与数据表上的规格相符，并且该�？槟芄辉� -20°C 的低温条件下冷启动
- 卓越可靠的 850 纳米技术：Avago VCSEL 并列式发射器和 PIN 并列式接收器
- 收发器可进行热插拔，便当进行维修和装置
- 双线串行 (TWS) 接口，具有可屏蔽中断的功效，以便扩展其运行功效
- 使用一个配有 MTP® (MPO) 光纤连接器的标准 12/8 通道光纤，以便对薄型质轻的高密度电缆进行治理
| 逻辑介面： | CML |
|---|---|
| 资料速率： | 40 Gbps |
| 产品类别： | MTPR/MPO |
| 光纤样式： | Multimode Glass |
| 最远距离(M)： | 150 |
| 标称光波长 (nm)： | 850 |
| 发射器： | VCSEL |
Related Products
AFBR-83EDxxZ
AFBR-83EDxxZ
The Avago AFBR-83EDxxZ is a pluggable 10-channel, parallel optics CXP Active Optical Cable (AOC) for multi-channel 10Gbps proprietary interconnect and 100 Gigabit Ethernet (100GbE) applications.
The AFBR-83EDxxZ is designed to operate over multimode fiber systems using a nominal wavelength of 850 nm. The electrical interface uses an 84-contact edge type connector. The AOC incorporates Avago Technologies' proven integrated circuit and VCSEL technology to provide reliable long life, high performance, and consistent service.
AFBR-83CDxxZ
AFBR-83CDxxZ
AFBR-79Q2EKZ
AFBR-8420EVK
AFBR-8420EVK
The Avago AFBR-8420EVK evaluation kit is designed to provide designers with a convenient means of evaluating Avago 100G CFP2 SR10 module. The evaluation kit supports the Avago AFBR-8420Z, a 10-channel pluggable, multi-mode parallel optic transceiver module for high-density 100G Ethernet and Optical Transport Network (OTN) applications.
SFP Extender Board
SFP Extender Board
The SFP extender board was designed to access SFP low speed control signals while a DUT SFP compliant to SFF-8074 is plugged into the target application system such as a network switch and router.