±ê×¼¹âÄ£¿é
622Mbps 1x9 SM Transceiver Module
Specifications
- ²úÆ·ÐͺÅ: FTTR-1306-XXX(XXXX)
- ¼æÈÝÆ·ÅÆ: ȫϵÁÐ
- ·â×°ÀàÐÍ: 1x9
- ´«ÊäËÙÂÊ: 622Mbps 1x9 SM Transceiver Module
- ´«Êä¾àÀë: 0~160km¿ÉÑ¡
- ·¢É䲨³¤: 622Mbps 1x9 SM Transceiver Module
- ½ÓÊÕ²¨³¤: 622Mbps 1x9 SM Transceiver Module
- ÊÂÇéζÈ: ÉÌÒµ¼¶0¡æ¡«+70¡æ/¹¤Òµ¼¶-40¡æ¡«+85¡æ ¿ÉÑ¡
- Êý×ÖÕï¶Ï: ²»´øDDM
- ½ÓÊÕÁéÃô¶È: 622Mbps 1x9 SM Transceiver Module
- ½ÓÊÕÁéÃô¶È: 622Mbps 1x9 SM Transceiver Module
Description
622Mbps 1x9 SM Transceiver Module
Product Description
F-tone¡¯s FTTR-1X06X-X series of transceiver modules are the perfect solution for high-speed communication networks.
The transceiver modules support data rates up to 622Mbps. These modules are fully compliant with the Multi-sourced 1x9 protocol.
The transceiver modules supplies the Differential PECL of3.3V, 5V, 3.3V/5.0V Voltage and provide the system designer with products to implement arange of FDDI and ATM (Asynchronous Transfer Mode) designs at the 622Mbps rateandSONET/OC-12, SDH/STM-4 for Telecommunication.
Business level transceiver module which operating at 0¡æ to 70¡æ and Industry level which operating extended temperature as -40¡æ to +85¡æ for available.
Application
- ATM equipments
- SONET/OC-12¡¢SDH/STM-4 equipments
Product Features
- Multi-sourced 1 x 9 pin packaged
- 1310nm FP or 1550nm DFB Laser Transmitter
- SC Duplex receptacle
- Up to100Km with 9/125¦Ìm SMF
- Single 3.3V, 5Vpower supply
- PECL signal input and output
- Wave solderable and washable with process plug inserted
- Two temperature ranges:
¡ª 0¡ãC to +70¡ãC
¡ª -40¡ãC to +85¡ãC for industry level
Absolute Maximum Ratings
Operating of the transceiver beyond the Absolute Conditions Listed in Table 1 will degrade or damage the product. It¡¯s not implied that the product would function above the recommended operating environment, it¡¯s possible to reduce the reliability and lifetime of device if Recommended Operating Environment is exceeded (Refer to table 2)
Table 1-- Absolute Maximum Conditions
|
Parameter |
Symbol |
Min |
Max |
Units |
|
Storage Temperature |
TST |
-40 |
+85 |
¡æ |
|
Supply Voltage |
VCC |
0 |
+6 |
V |
|
Relative Humidity |
RH |
5 |
95 |
% |
|
Lead Soldering Temperature & Time |
- |
- |
260/10 |
¡æ/S |
Table 2-- Recommended Operating Environment
|
Parameter |
Symbol |
Min |
Typ |
Max |
Units |
|
|
Supply Voltage |
3.3V power |
VCC |
3.1 |
3.3 |
3.5 |
V |
|
5V power |
4.75 |
5.0 |
5.25 |
|||
|
Ambient operating Temperature |
Commerce level |
TOP |
0 |
+70 |
¡æ |
|
|
Industry level |
-40 |
+85 |
||||
|
Supply Current |
ITX+IRX |
- |
150 |
200 |
mA |
|
Optical Parameters
Table 3 FTTR-1306X-20X Transceiver Optical and Electrical Characteristics
(Ambient Operating Temperature Ta=25¡ãC, VCC= 3.3V)
|
Parameter |
Symbol |
Min |
Typ |
Max |
Units |
|
Transmitter |
|||||
|
Data rate |
B |
622 |
- |
Mb/s |
|
|
Output Center Wavelength |
¦Ëc |
1260 |
1310 |
1360 |
nm |
|
Output Spectral width (RMS) |
¦Ë |
- |
3.0 |
nm |
|
|
Average Optical Output Power |
Po |
-14 |
-8 |
-5 |
dBm |
|
Extinction Ratio |
EXT |
10 |
- |
- |
dB |
|
Optic Output Eye: Compliant with Bellcore TR-NWT-000253 and ITU recommendation G.957 |
|||||
|
Receiver |
|||||
|
Receiver Sensitivity |
PMIN |
- |
-28 |
dBm |
|
|
Maximum Input Power |
PMAX |
-3 |
- |
dBm |
|
|
Signal Detect -- Asserted |
PA |
- |
-28 |
dBm |
|
|
Signal Detect -- Deasserted |
PD |
-38 |
- |
dBm |
|
|
Signal Detect--Hysteresis |
PHYS |
1.0 |
4.0 |
dB |
|
Table 4FTTR-1306X-40X Transceiver Optical and Electrical Characteristics
(Ambient Operating Temperature Ta=25¡ãC, VCC= 3.3V)
|
Parameter |
Symbol |
Min |
Typ |
Max |
Units |
|
Transmitter |
|||||
|
Data rate |
B |
- |
622 |
Mb/s |
|
|
Output Center Wavelength |
¦Ëc |
1260 |
1310 |
1360 |
nm |
|
Output Spectral width (RMS) |
¦Ë |
- |
3.0 |
nm |
|
|
Average Optical Output Power |
Po |
-8 |
-5 |
-3 |
dBm |
|
Extinction Ratio |
EXT |
10 |
- |
- |
dB |
|
Optic Output Eye: Compliant with Bellcore TR-NWT-000253 and ITU recommendation G.957 |
|||||
|
Receiver |
|||||
|
Receiver Sensitivity |
PMIN |
- |
-28 |
dBm |
|
|
Maximum Input Power |
PMAX |
-3 |
- |
dBm |
|
|
Signal Detect -- Asserted |
PA |
- |
-28 |
dBm |
|
|
Signal Detect -- Deasserted |
PD |
-38 |
- |
dBm |
|
|
Signal Detect--Hysteresis |
PHYS |
1.0 |
4.0 |
dB |
|
Table 5FTTR-1506X-20X Transceiver Optical and Electrical Characteristics
(Ambient Operating Temperature Ta=25¡ãC, VCC= 3.3V)
|
Parameter |
Symbol |
Min |
Typ |
Max |
Units |
|
Transmitter |
|||||
|
Data rate |
B |
622 |
- |
Mb/s |
|
|
Output Center Wavelength |
¦Ëc |
1480 |
1550 |
1580 |
nm |
|
Output Spectral width (-20dB) |
¦Ë |
- |
1.0 |
nm |
|
|
Average Optical Output Power |
Po |
-15 |
-10 |
-8 |
dBm |
|
Extinction Ratio |
EXT |
10 |
- |
- |
dB |
|
Optic Output Eye: Compliant with Bellcore TR-NWT-000253 and ITU recommendation G.957 |
|||||
|
Receiver |
|||||
|
Receiver Sensitivity |
PMIN |
- |
-28 |
dBm |
|
|
Maximum Input Power |
PMAX |
-3 |
- |
dBm |
|
|
Signal Detect -- Asserted |
PA |
- |
-28 |
dBm |
|
|
Signal Detect -- Deasserted |
PD |
-38 |
- |
dBm |
|
|
Signal Detect--Hysteresis |
PHYS |
1.0 |
4.0 |
dB |
|
Table 6FTTR-1506X-40X Transceiver Optical and Electrical Characteristics
(Ambient Operating Temperature Ta=25¡ãC, VCC= 3.3V)
|
Parameter |
Symbol |
Min |
Typ |
Max |
Units |
|
Transmitter |
|||||
|
Data rate |
B |
622 |
- |
Mb/s |
|
|
Output Center Wavelength |
¦Ëc |
1480 |
1550 |
1580 |
nm |
|
Output Spectral width (-20dB) |
¦Ë |
- |
1.0 |
nm |
|
|
Average Optical Output Power |
Po |
-10 |
-18 |
-5 |
dBm |
|
Extinction Ratio |
EXT |
10 |
- |
- |
dB |
|
Optic Output Eye: Compliant with Bellcore TR-NWT-000253 and ITU recommendation G.957 |
|||||
|
Receiver |
|||||
|
Receiver Sensitivity |
PMIN |
- |
-28 |
dBm |
|
|
Maximum Input Power |
PMAX |
-3 |
- |
dBm |
|
|
Signal Detect -- Asserted |
PA |
- |
-28 |
dBm |
|
|
Signal Detect -- Deasserted |
PD |
-38 |
- |
dBm |
|
|
Signal Detect--Hysteresis |
PHYS |
1.0 |
4.0 |
dB |
|
Table 7FTTR-1506X-60X Transceiver Optical and Electrical Characteristics
(Ambient Operating Temperature Ta=25¡ãC, VCC= 3.3V)
|
Parameter |
Symbol |
Min |
Typ |
Max |
Units |
|
Transmitter |
|||||
|
Data rate |
B |
- |
622 |
Mb/s |
|
|
Output Center Wavelength |
¦Ëc |
1480 |
1550 |
1580 |
nm |
|
Output Spectral width (-20dB) |
¦Ë |
- |
1.0 |
nm |
|
|
Average Optical Output Power |
Po |
-8 |
-5 |
-3 |
dBm |
|
Extinction Ratio |
EXT |
10 |
- |
- |
dB |
|
Optic Output Eye: Compliant with Bellcore TR-NWT-000253 and ITU recommendation G.957 |
|||||
|
Receiver |
|||||
|
Receiver Sensitivity |
PMIN |
- |
-29 |
dBm |
|
|
Maximum Input Power |
PMAX |
-3 |
- |
dBm |
|
|
Signal Detect -- Asserted |
PA |
- |
-29 |
dBm |
|
|
Signal Detect -- Deasserted |
PD |
-38 |
- |
dBm |
|
|
Signal Detect--Hysteresis |
PHYS |
1.0 |
4.0 |
dB |
|
Table 8FTTR-1506X-80X Transceiver Optical and Electrical Characteristics
(Ambient Operating Temperature Ta=25¡ãC, VCC= 3.3V)
|
Parameter |
Symbol |
Min |
Typ |
Max |
Units |
|
Transmitter |
|||||
|
Data rate |
B |
- |
622 |
Mb/s |
|
|
Output Center Wavelength |
¦Ëc |
1480 |
1550 |
1580 |
nm |
|
Output Spectral width (-20dB) |
¦Ë |
- |
1.0 |
nm |
|
|
Average Optical Output Power |
Po |
-5 |
-3 |
0 |
dBm |
|
Extinction Ratio |
EXT |
10 |
- |
- |
dB |
|
Optic Output Eye: Compliant with Bellcore TR-NWT-000253 and ITU recommendation G.957 |
|||||
|
Receiver |
|||||
|
Receiver Sensitivity |
PMIN |
- |
-30 |
dBm |
|
|
Maximum Input Power |
PMAX |
-3 |
- |
dBm |
|
|
Signal Detect -- Asserted |
PA |
- |
-30 |
dBm |
|
|
Signal Detect -- Deasserted |
PD |
-40 |
- |
dBm |
|
|
Signal Detect--Hysteresis |
PHYS |
1.0 |
4.0 |
dB |
|
Table 9FTTR-1506X-100XTransceiver Optical and Electrical Characteristics
(Ambient Operating Temperature Ta=25¡ãC, VCC= 3.3V)
|
Parameter |
Symbol |
Min |
Typ |
Max |
Units |
|
Transmitter |
|||||
|
Data rate |
B |
- |
622 |
Mb/s |
|
|
Output Center Wavelength |
¦Ëc |
1480 |
1550 |
1580 |
nm |
|
Output Spectral width (-20dB) |
¦Ë |
- |
1.0 |
nm |
|
|
Average Optical Output Power |
Po |
0 |
1 |
2 |
dBm |
|
Extinction Ratio |
EXT |
10 |
- |
- |
dB |
|
Optic Output Eye: Compliant with Bellcore TR-NWT-000253 and ITU recommendation G.957 |
|||||
|
Receiver |
|||||
|
Receiver Sensitivity |
PMIN |
- |
-30 |
dBm |
|
|
Maximum Input Power |
PMAX |
-3 |
- |
dBm |
|
|
Signal Detect -- Asserted |
PA |
- |
-32 |
dBm |
|
|
Signal Detect -- Deasserted |
PD |
-45 |
- |
dBm |
|
|
Signal Detect--Hysteresis |
PHYS |
1.0 |
4.0 |
dB |
|
Electrical Parameters
Table 10 (Ambient Operating Temperature Ta=25¡ãC, VCC = 3.3V/5V)
|
Parameter |
Symbol |
Min |
Typ |
Max |
Units |
|
Transmitter |
|||||
|
Data Input Current - High |
IIL |
- |
- |
350 |
¦ÌA |
|
Data Input Voltage - Low |
VIL |
VCC-1.81 |
- |
VCC-1.48 |
V |
|
Data Input Voltage - High |
VIH |
VCC-1.17 |
- |
VCC-0.88 |
V |
|
Receiver |
|||||
|
Data Output Voltage ¨C Low |
VOL |
VCC-1.83 |
- |
VCC-1.56 |
V |
|
Data Output Voltage ¨C High |
VOH |
VCC-1.09 |
- |
VCC-0.88 |
V |
|
Signal Detect Output Voltage-Low |
VOL |
VCC-1.83 |
- |
VCC-1.56 |
V |
|
Signal Detect Output Voltage-High |
VOH |
VCC-1.09 |
- |
VCC-0.88 |
V |
Pin Assignment & Signal Definition
Table11¡ªConnector pin assignment
|
Pin # |
Pin Name |
Description |
|
|
1 |
Rx VEE |
Receiver Signal Ground |
|
|
2 |
RD+ |
Receiver Data Out |
|
|
3 |
RD- |
Receiver Data Out Bar |
|
|
4 |
SD |
Signal Detect |
|
|
5 |
Rx VCC |
Receiver Power Supply |
|
|
6 |
Tx VCC |
Transmitter Power Supply |
|
|
7 |
TD- |
Transmitter Data In Bar |
|
|
8 |
TD+ |
Transmitter Data In |
|
|
9 |
Tx VEE |
Transmitter Ground |
|
|
1X9-3.3V-622M-SMϵÁÐ |
||
|
FTTR-1X06-YYXX |
1x9-3.3V-PECL-£¨SD PECL£©-622M-SC/FC/ST,0 ~ +70¡ãC/-40 ~ +85¡ãC, |
|
|
FTTR-1X06C-YYXX |
1x9-3.3V-CML-£¨SD PECL£©-622M-SC/FC/ST,0 ~ +70¡ãC/-40 ~ +85¡ãC, |
|
|
FTTR-1X06L-YYXX |
1x9-3.3V- LVDS-£¨SD PECL£©-622M-SC/FC/ST,0 ~ +70¡ãC/-40 ~ +85¡ãC, |
|
|
FTTR-1X06T-YYXX |
1x9-3.3V-PECL-£¨SD TTL£©-622M-SC/FC/ST,0 ~ +70¡ãC/-40 ~ +85¡ãC, |
|
|
FTTR-1X06CT-YYXX |
1x9-3.3V-CML-£¨SD TTL£©-622M-SC/FC/ST,0 ~ +70¡ãC/-40 ~ +85¡ãC, |
|
|
FTTR-1X06LT-YYXX |
1x9-3.3V- LVDS-£¨SD TTL£©-622M-SC/FC/ST,0 ~ +70¡ãC/-40 ~ +85¡ãC, |
|
|
1X9-5V-622M-SMϵÁÐ |
||
|
FTTR-1X06H-YYXX |
1x9-5V-PECL-£¨SD PECL£©-622M-SC/FC/ST,0 ~ +70¡ãC/-40 ~ +85¡ãC, |
|
|
FTTR-1X06HC-YYXX |
1x9-5V-CML-£¨SD PECL£©-622M-SC/FC/ST,0 ~ +70¡ãC/-40 ~ +85¡ãC, |
|
|
FTTR-1X06HL-YYXX |
1x9-5V- LVDS-£¨SD PECL£©-622M-SC/FC/ST,0 ~ +70¡ãC/-40 ~ +85¡ãC, |
|
|
FTTR-1X06HT-YYXX |
1x9-5V-PECL-£¨SD TTL£©-622M-SC/FC/ST,0 ~ +70¡ãC/-40 ~ +85¡ãC, |
|
|
FTTR-1X06HCT-YYXX |
1x9-5V-CML-£¨SD TTL£©-622M-SC/FC/ST,0 ~ +70¡ãC/-40 ~ +85¡ãC, |
|
|
FTTR-1X06HLT-YYXX |
1x9-5V- LVDS-£¨SD TTL£©-622M-SC/FC/ST,0 ~ +70¡ãC/-40 ~ +85¡ãC, |
|
|
1X: |
YY: |
XX: |
|
13: TX1310nm |
0~160KM |
none: SC 0 ~ +70¡ãC |
|
15: TX1550nm |
I: SC -40 ~ +85¡ãC |
|
|
F: FC 0 ~ +70¡ãC |
||
|
FI: FC -40 ~ +85¡ãC |
||
|
T:ST 0 ~ +70¡ãC |
||
|
TI: ST -40 ~ +85¡ãC |
||
Order Information
Note: Specifications subject to change without notice.
Related Products
1x9 84Mbps MM Receiver Module
DC0~10M 1x9¶àÄ£µ¥ÊÕ¹âÄ£¿é£º1x 9 0~10Mbps MM Receiver Module.F-tone¡¯sFLRX-M1300-02X series of receiver modules are the perfect solution for Low-speed communication networks.The receiver modules support data rates up to 10Mbps. These modules are fully compliant with the Multi-sourced 1x9 protocol.The receiver modules supplies the 5 Voltage and provides the system designer with products to implement a range of low-speed data and fiber MODEM designs at the 0 to 10Mbps rate for fiber communications.
2~100Mbps 1x9µ¥Ä£¹âÄ£¿é
2~100Mbps 1x9µ¥Ä£¹âÄ£¿é:2~100Mbps 1 x 9 TTL Transceiver Module,F-tone¡¯sFLTR-1x02-xx series of transceiver modules are the perfect solution for Low-speed communication networks.The transceiver modules support data rates up 2 to 100 Mbps. These modules are fully compliant with the Multi-sourced 1x9 protocol.The transceiver modules suppliesthe TTL interface of 5.0 Voltage and provide the system designer with products to implement arange of low-speed data and digital video transmission designs at the 2 to 84 Mbps rate for fiber communications.Commerce level transceiver module which operating at 0¡æ to 70¡æ and Industry level which operating extended temperature as -40¡æ to +85¡æ for available.
2~52Mbps 1x9 TTL MM Transceiver
2~52Mbps 1x9 TTL MM Transceiver£¬F-tone¡¯sFLTR-8502H-05X series of transceiver modules are the perfect solution for Low-speed communication networks.The transceiver modules support data rates up 2 to 52 Mbps. These modules are fully compliant with the Multi-sourced 1¡Á9 protocol.The transceiver modules suppliesthe TTL interface of 5.0 Voltage and provide the system designer with products to implement arange of low-speed data and digital video transmission designs at the 2 to 52 Mbps rate for fiber
1¡Á9 0~10Mbps SM TTL Transceiver Module
1¡Á9 0~10Mbps SM TTL Transceiver Module£ºF-tone¡¯sFTLR-xx00(H)-XX 0~10M series of transceiver modules are the perfect solution for Low-speed communication networks.The transceiver modules supplies the 5 or 3.3 Voltage ,The modules supplies the 5 or 3.3 Voltage , These modules Applied to RS232¡¢RS485 optical-electrical converter for industrial control and electric power control with data rates up to 10Mbps£¬These modules are fully compliant with the Multi-sourced 1¡Á9 protocol.Commerce level transceiver module which operating case temperature range at 0¡æ to 70¡æ and industry level which operating case temperature at -40¡æ to +85¡æ for available.
1x9 84Mbps MM Transmitter Module
1x9 84Mbps MM Transmitter Module:F-tone¡¯sFLTX-XX02-XX series of receiver modules are the perfect solution for Low-speed communication networks.The transmitter modules support data rates up to 84Mbps. These modules are fully compliant with the Multi-sourced 1x9 protocol.The transmitter modules supplies the 3.3/5 Voltage and provides the system designer with products to implement a range of low-speed data at the 2 Mbps to 84Mbps rate for fiber communications.
1x9-155M-20km transceiver
1x9-155M-20km transceiver
1.Feature
- 1¡Á9 package with FC connector
- 1310nm FP Laser and PIN photodetector
- 20Km transmission with SMF
- +5.0V single power supply
- PECL compatible data input/output interface
- Low EMI and excellent ESD protection
- laser safety standard IEC-60825 compliant
- Compatible with RoHS
2.Application
- Ethernet
- Telecom