标准光�？�
1G SFP
Description
The IEEE 802.3z standard includes 1000BASE-SX for transmission over multi-mode fiber, 1000BASE-LX for transmission over single-mode fiber, 100BASE-FX is a version of Fast Ethernet over optical fiber. It uses a 1300 nm near-infrared (NIR) light wavelength transmitted via two strands of optical fiber, one for receive(RX) and the other for transmit(TX), 100BASE-SX is a version of Fast Ethernet over optical fiber. It uses two strands of multi-mode optical fiber for receive and transmit. F-tone Networks is produce complete range for FE and GE optical fiber transceivers.
Features
● Operating Data Rate up to 1.25Gbps
● Up to 160km
● Single 3.3V Power Supply and LVTTL Logic Interface
● Hot-Pluggable SFP Footprint Duplex LC Connector
● Interface Class 1 FDA and IEC60825-1 Laser Safety Compliant
● Operating Case Temperature Standard: 0C~+70C and Industrial: -40C~+85C
● Compliant with SFP MSA Specification
● Compliant with SFF-8472
Application
● Gigabit Ethernet Switches and Routers
● Fiber Channel Switch Infrastructure
● Other Optical Links
Ordering information
| Part No. | Description | Data Rate | Wavelength | Distance | Connector | Temp. |
| FT-AM-S-8503-02-D | SFP FE | ≤ 155Mbps | 850nm | 2km | LC | C/I |
| FT-AM-S-1303-2M-D | SFP FE | ≤ 155Mbps | 1310nm | 2km | LC | C/I |
| FT-AM-S-1303-2-D | SFP FE | ≤ 155Mbps | 1310nm | 2km | LC | C/I |
| FT-AM-S-1303-15-D | SFP FE | ≤ 155Mbps | 1310nm | 15km | LC | C/I |
| FT-AM-S-1303-40-D | SFP FE | ≤ 155Mbps | 1310nm | 40km | LC | C/I |
| FT-AM-S-1303-80-D | SFP FE | ≤ 155Mbps | 1310nm | 80km | LC | C/I |
| FT-AM-S-1503-15-D | SFP FE | ≤ 155Mbps | 1550nm | 15km | LC | C/I |
| FT-AM-S-1503-80-D | SFP FE | ≤ 155Mbps | 1550nm | 80km | LC | C/I |
| FT-AM-S-1503-A-D | SFP FE | ≤ 155Mbps | 1550nm | 100km | LC | C/I |
| FT-AM-S-1503-B-D | SFP FE | ≤ 155Mbps | 1550nm | 120km | LC | C/I |
| FT-AM-S-1503-C-D | SFP FE | ≤ 155Mbps | 1550nm | 160km | LC | C/I |
| FT-AM-S-1503-D-D | SFP FE | ≤ 155Mbps | 1550nm | 200km | LC | C/I |
| FT-AM-S-8512-02-D | SFP GE | ≤ 1.0625Gbps | 850nm | 0.550km | LC | C/I |
| FT-AM-S-1312-M-D | SFP GE | ≤ 1.25Gbps | 1310nm | 1km | LC | C/I |
| FT-AM-S-1312-10-D | SFP GE | ≤ 1.25Gbps | 1310nm | 10km | LC | C/I |
| FT-AM-S-1312-15-D | SFP GE | ≤ 1.25Gbps | 1310nm | 15km | LC | C/I |
| FT-AM-S-1312-20-D | SFP GE | ≤ 1.25Gbps | 1310nm | 20km | LC | C/I |
| FT-AM-S-1312-40-D | SFP GE | ≤ 1.25Gbps | 1310nm | 40km | LC | C/I |
| FT-AM-S-1512-40-D | SFP GE | ≤ 1.25Gbps | 1550nm | 40km | LC | C/I |
| FT-AM-S-1512-80-D | SFP GE | ≤ 1.25Gbps | 1550nm | 80km | LC | C/I |
| FT-AM-S-1512-A-D | SFP GE | ≤ 1.25Gbps | 1550nm | 100km | LC | C/I |
| FT-AM-S-1512-B-D | SFP GE | ≤ 1.25Gbps | 1550nm | 120km | LC | C/I |
| FT-AM-S-1512-C-D | SFP GE | ≤ 1.25Gbps | 1550nm | 160km | LC | C/I |
| FT-AM-S-8524-02 | SFP GE | ≤ 2.125Gbps | 850nm | 400m | LC | C/I |
Important Notice
Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.
The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.
Related Products
10G XFP
10G XFP
F-tone Networks XFP transceiver is a high performance, cost effective modulse for serial optical data communications applications specified for signal rates of 9.95 Gb/s to 11.3 Gb/s. It is fully compliant to XFP MSA Rev 4.5.
10G BIDI XFP
10G BIDI XFP
F-tone Networks BID XFP transceivers are designed for bi-directional 10G serial optical data communications such as IEEE 802.3ae 10GBASE-BX by using 1330(1270nm) transmitter and 1270(1330) nm receiver.
10G CWDM XFP
10G CWDM XFP
CWDM XFP optical transceivers are designed for Storage, IP network and LAN. The CWDM XFP is a fully integrated 8G~10Gbps~11.1 optical transceiver module. The CWDM XFP is a hot pluggable module in the Z-direction that is mainly usable in typical router/switches line card applications.
10G DWDM XFP
10G DWDM XFP
F-tone Networks DWDM XFP transceivers are available in channels defined in the ITU Grid (100 GHz spacing), from Channel 19 to Channel 61, or ITU Grid (50Ghz spacing), from channel 200 to 592ch.
XFP DAC
XFP DAC
F-tone Networks’s Copper XFP Cable assemblies are high-performance, cost effective I/O solutions for 10 GB Ethernet and 10G Fiber Channel applications. XFP copper modules allow hardware manufacturers to achieve high port density, configurability and utilization at a very low cost and to reduce power budget.
X2 to SFP+ converter
X2 to SFP+ converter
F-tone Networks X2 to SFP+ and XENPAK to SFP+ converter enables migration from X2/XENPAK form factors to SFP+ without having to upgrade or replace the switches. Can be used with SR, LR, EZ, ZR, BIDI, CWDM or DWDM F-tone Networks SFP+ optical transceivers.