• 4 independent full-duplex channels
• Up to 11.2Gbps data rate per channel
• MTP/MPO optical connector
• QSFP+ MSA compliant
• Digital diagnostic capabilities
• Capable of over 100m transmission on OM3 multi-mode ribbon fiber
• CML compatible electrical I/O
• Single +3.3V power supply
• Operating case temperature: 0¡ãC to 70¡ãC(Standard), -40¡ãC to 85¡ãC (Industrial)
• XLPPI electric interface (with 1.5W Max power)
• RoHS-6 compliant

• Compliant with 40G Ethernet IEEE802.3ba and
• 40GBASE-LR4 Standard
• QSFP+ MSA compliant
• Compliant with QDR/DDR Infiniband data rates
• Up to 11.2Gbps data rate per wavelength
• 4 CWDM lanes MUX/DEMUX design
• Up to 10km transmission
• Operating case temperature: 0~70C
• Maximum 3.5W operation power
• RoHS compliant

• Transmission data rate up to 11.2Gbit/s per channel
• CFP MSA compliant
• Compliant to IEEE 802.3ba specification for 100GBASE-SR10 links
• Up to 11.2 Gbps per channel bandwidth,
• OTU4 compatible
• 10 channels 850nm VCSEL array
• 10 channels PIN photo detector array
• OM3 Multimode Fiber cable of up to 300m and OM4 Multimode Fiber cable of up to 400m
• MDIO digital diagnostic and control capabilities.
• compliant to CFP MSA Management Interface Specification, Draft 1.4
• TX input and RX output CDR retiming
• Hot pluggable electrical interface
• Power class 1 (<8W max)
• Operating case temperature 0¡ãC to +70¡ãC
• 3.3V power supply
• RoHS 6 compliant(lead free)

• Transmission data rate up to 11.2Gbps per channel
• CFP MSA compliant
• Compliant to IEEE 802.3ba specification for 40GBASE-LR4 links
• OTU3 compatible
• 1310nm Un-cooled CWDM DFB-DML ,Transmitter and optical MUX
• High Sensitivity PIN-TIA and optical DEMUX
• 1271, 1291, 1311, 1331nm CWDM grid in ITU-T G.694.2 up to 10km over a SMF
• MDIO digital diagnostic and control capabilities.
• compliant to CFP MSA Management Interface Specification, Draft 1.4
• TX input and RX output CDR retiming
• Hot pluggable electrical interface
• Power class 1 (<8W max)
• Operating case temperature 0¡ãC to +70¡ãC
• 3.3V power supply
• RoHS 6 compliant£¨lead free

    ÇкÏIEEE802.3ahÒªÇó
    Âú×ãµçÐÅÒªÇóPX20+/PX20++
    ¾ßÓÐÇкÏSFF-8472¹æ·¶µÄDDM¹¦Ð§
    ¹âÏ˽ӿÚÊǵ¥ÏËSC/LC½Ó¿Ú»òÕß´øβÏË
    ·¢Éä¶Ë1490nm³¤·¢¹â¡¢1310nmDFPÍ»·¢Ä£Ê½¼¤¹âÆ÷
    ½ÓÊÕ1310nm¡¢1490nmµÄPIN/APD¼¤¹âÆ÷
    ÇкÏROSH6µÄ±ê×¼

• Single fiber bi-directional data links asymmetric TX 2488Mbps / RX1244Mbps application
• 1490nm continuous-mode DFB laser transmitter and 1310nm burst-mode APD-TIA receiver
• Small Form Factor Pluggable package with SC/UPC Connector
• Support Class C+ 17~32dB attenuation range application (With FEC)
• Reset burst-mode receiver design support more than 15dB dynamic range
• 0 to 70¡ãC operating temperature
• Single 3.3V power supply  
• Digital diagnostic monitoring interface
• Digital burst RSSI function to monitor the input optical power level
• LVPECL compatible data input/output interface
• LVTTL transmitter disable control
• LVTTL transmitter laser fault alarm
• LVTTL receiver Signal Detect (SD) indication response within 50ns.
• Low EMI and excellent ESD protection
• Class I laser safety standard IEC-60825 compliant
• RoHS-6 compliance