标准光�？�
10GBASE-SR/SW 400m SFP+ Extended Temperature Optical Transceiver
Description
10Gb/s SFP+ transceivers are designed for use in 10-Gigabit Ethernet links over multimode fiber. They are compliant with SFF-8431, SFF-8432, IEEE 802.3-2012 10GBASE-SR/SW and 10G Fibre Channel 1200-Mx-SN-I. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472.
Features
● Hot-pluggable SFP+ footprint
● Supports 9.95 to 10.5 Gb/s bit rates*
● Power dissipation < 1W
● RoHS compliant
● Single 3.3V power supply
● Maximum link length of 400m on OM4 MMF
● Uncooled 850nm VCSEL laser
● Receiver limiting electrical interface
● Duplex LC connector
● Built-in digital diagnostic functions
● Extended temperature range: -5°C to 85°C
*Contact Coherent for higher data-rate support up to 11.1 Gb/s
Applications
● 10GBASE-SR/SW 10G Ethernet
● 1200-Mx-SN-I 10G Fibre Channel
注：本产品有全国产化型号可选
Important Notice
Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.
The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.
Related Products
16G Fibre Channel (16GFC) 25km SFP+ Optical Transceiver
16G Fibre Channel (16GFC) 25km SFP+ Optical Transceiver
SFP+ optical transceivers are designed for use in Fibre Channel links up to 14.025 Gb/s data rate and up to 25 km length. They are compliant with FC-PI-5 Rev. 6.10 and SFF-8472 Rev 11.0, and compatible with SFF-8432 and applicable portions of SFF-8431 Rev. 3.0. The optical transceiver is RoHS compliant as described in Application Note AN-2038.
8G Fibre Channel (8GFC) 150m SFP+ Optical Transceive
8G Fibre Channel (8GFC) 150m SFP+ Optical Transceive
SFP+ transceivers are designed for use in Fibre Channel links up to 8.5 Gb/s data rate over multimode fiber. They are compliant with FC-PI-4 Rev. 8.00 and SFF-8472 Rev 11.0, and compatible with SFF-8432 and applicable portions of SFF-8431 Rev. 4.1. The optical transceiver is RoHS compliant as described in Application Note AN-2038.
8G Fibre Channel (8GFC) 150m Extended Temperature SFP+ Optical Transceiver
8G Fibre Channel (8GFC) 150m Extended Temperature SFP+ Optical Transceiver
SFP+ transceivers are designed for use in Fibre Channel links up to 8.5 Gb/s data rate over multimode fiber. They are compliant with FC-PI-4 Rev. 8.00 and SFF-8472 Rev 11.0, and compatible with SFF-8432 and applicable portions of SFF-8431 Rev. 4.1. The optical transceiver is RoHS compliant as described in Application Note AN-2038.
8G Fibre Channel (8GFC) 10km SFP+ Optical Transceiver
8G Fibre Channel (8GFC) 10km SFP+ Optical Transceiver
SFP+ optical transceivers are designed for use in Fibre Channel links up to 8.5 Gb/s data rate and up to 10 km link length. They are compliant with FCPI-4 Rev. 7.00 and SFF-8472 Rev 10.1, and compatible with SFF-8432 and applicable portions of SFF-8431 Rev. 1.3. The optical transceiver is RoHS compliant as described in Application Note AN-2038.
10GBASE-SR/SW 400m Multimode Datacom SFP+ Optical Transceiver
10GBASE-SR/SW 400m Multimode Datacom SFP+ Optical Transceiver
SFP+ optical transceivers are designed for use in 10-Gigabit Ethernet links over multimode fiber. They are compliant with SFF-8431, SFF-8432, IEEE 802.3-2012 10GBASE-SR/SW and 10G Fibre Channel 1200-Mx-SN-I. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472.
10G/1G Dual Rate (10GBASE-SR and 1000BASE-SX) 400m Multimode Datacom SFP+ Optical Transceiver
10G/1G Dual Rate (10GBASE-SR and 1000BASE-SX) 400m Multimode Datacom SFP+ Optical Transceiver
1G/10G Dual-Rate SFP+ optical transceivers are designed for use in 1-Gigabit and 10-Gigabit Ethernet links over multimode fiber. They are compliant with SFF-8431, IEEE 802.3-2012 10GBASE-SR/SW and 1000BASE-SX. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472.