标准光�？�
2/10km Multi-Rate SFP+ Transceiver
Specifications
- 产品型号: FTCS-131X-10X
- 兼容品牌: 全系列
- 封装类型: SFP+
- 传输速率: 8.5Gb/s and from 9.95 to 11.3Gb/s
- 传输距离: Maximum link length of 10km
- 发射波长: 1310nm
- 接收波长: 1310nm
- 事情温度: 商业级0℃～+70℃/工业级-40℃～+85℃ 可选
- 数字诊断: 带DDM
- 接收灵敏度: 10G Ethernet 10GBASE-LR/-LW
- 接收灵敏度: 10G Ethernet 10GBASE-LR/-LW
Description
2/10km Multi-Rate SFP+ Transceiver
F-tone's SFP 10Gb/s Enhanced Small Form Factor Pluggable SFP+ transceivers are designed for use in 10-Gigabit, multi-rate links up to maximum 10km over G.652 single mode fiber. They are compliant with SFF-8431, SFF-8432, ITU-T G.693 VSR2000-2R1, SDH I-64.1 and OTN P1I1-2D1 (up to 2km), IEEE 802.3ae 10GBASE-LR/LW and 10G Fibre Channel 1200-SM-LL-L (up to 10km). Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472.
The SFP transceivers utilize internal clock and date recovery (CDR) units on the transmitter and the receiver chains for SONET/SDH jitter compliance and to enhance the signal integrity on XFP XFI-like host card designs. The transceiver is RoHS compliant and lead free per Directive 2002/95/EC, and F-tone Application Note AN-2028.
Key Features
- Hot-pluggable SFP+ footprint
- Supports 8.5Gb/s and from 9.95 to 11.3Gb/s bit rates
- Power dissipation < 1.5W
- RoHS-6 compliant (lead-free)
- Commercial temperature range -5°C to 75°C
- Single 3.3V power supply
- Maximum link length of 10km
- Uncooled 1310nm DFB laser
- Receiver limiting electrical interface
- Duplex LC connector
- Built-in digital diagnostic functions
Applications
- 10G NRZ SONET VSR2000-2R1, SDH I-64.1, OTN P1I1-2D1
- 10G Ethernet 10GBASE-LR/-LW
- 10G Fibre Channel 1200-SM-LL-L
- G.709 OTU 1e/2/2e FEC bit rates
- 8.5Gb/s Fibre Channel
Related Products
10Gbps SFP+ 10KM单模光�？�
- Optical interface compliant to IEEE 802.3ae 10GBASE-LR
- Electrical interface compliant to SFF-8431
- Hot Pluggable
- 1310nm DFB transmitter, PIN photo-detector
- Operating case temperature: 0°C to 70°C(Standard), -40°C to 85°C (Industrial)
- Low power consumption
- Applicable for 10km SMF connection
- All-metal housing for superior EMI performance
- Advanced firmware allow customer system encryption information to be stored in transceiver
- Cost effective SFP+ solution, enables higher port densities and greater bandwidth
6G 850nm SFP+ Transceiver
F-tone's FTCS-8561-02X SFP+ transceivers are designed for use in wireless application of links up to 6.1 Gb/s data rate over multimode fiber. The product is RoHS compliant and lead-free per Directive 2002/95/EC.
8GFC 850nm SFP+ Transceiver
F-tone's FTCS-8585-02X SFP+ transceivers are designed for use in Fibre Channel links up to 8.5 Gb/s data rate over multimode fiber. They are compliant with FC-PI-4 Rev. 8.00 and SFF-8472 Rev 11.0, and compatible with SFF-8432 and applicable portions of SFF-8431 Rev. 4.1. The product is RoHS compliant and lead-free per Directive 2002/95/EC and F-tone Application Note FN-2038.
16GFC 850nm SFP+ Transceiver
F-tone's FTCS-85FX-02X SFP+ transceivers are designed for use in Fibre Channel links up to 14.025 Gb/s data rate over multimode fiber. They are compliant with FC-PI-5 Rev. 6.00, SFF-8472 Rev 11.0 and SFF-8081, and compatible with SFF-8432 and applicable portions of SFF-8431 Rev. 4.1. The product is RoHS compliant and lead-free per Directive 2002/95/EC and F-tone Application Note FN-2038.
10Gb/s 220m Datacom SFP+ Transceiver
F-tone's FTCS-131X-02X 10Gb/s Enhanced Small Form Factor Pluggable SFP+ transceivers are designed for use in 10-Gigabit Ethernet links up to 220m over Multi Mode fiber. They are compliant with SFF-8431, SFF-8432 and IEEE 802.3 aq 10GBASE-LRM. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472. The FTCS-131X-02X is a "linear module" i.e. it employs a linear receiver. Host board designers using an EDC PHY IC should follow the IC manufacturer's recommended settings for interoperating the host board EDC PHY with a linear receiver SFP+ module. The transceiver is RoHS compliant and lead-free per Directive 2002/95/EC, and F-tone Application Note FN-2032.
10Gb/s 10km Datacom SFP+ Transceiver
F-tone's FTCS-131X-10X 10Gb/s Enhanced Small Form Factor Pluggable SFP+ transceivers are designed for use in 10-Gigabit Ethernet links up to 10km over Single Mode fiber. They are compliant with SFF-8431, SFF-8432 and IEEE 802.3ae 10GBASE-LR/LW and 10G Fibre Channel 1200-SM-LL-L. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472. The FTCS-131X-10X is a "limiting module", i.e., it employs a limiting receiver. Host board designers using an EDC PHY IC should follow the IC manufacturer's recommended settings for interoperating the host-board EDC PHY with a limiting receiver SFP+ module. The transceiver is RoHS compliant and lead free per Directive 2002/95/EC, and F-tone Application Note AN-2034