Description
F-tone Networks’ FT-93-VAS-YB series are Ytterbium-doped fiber ASE broadband light source in the wavelength range of 1000nm to 1100nm offering 10mW and 20mW output power, which is particular useful for 1060nm fiber laser component characterization. F-tone Networks’ FT-93-ALA-1050 are available in benchtop or OEM module. In the benchtop unit, the output power , alarms and driving current values are shown on the LCD display. Output power can be adjusted by tuning the front panel control knob. Also active emission button is used to enhance operation safety. The OEM module version is an ideal building block for OEM system integrators especially for fiber optical sensing and optical tomography applications. It requires only a single +5V power supply with low power consumption.
Feathure
Wide spectral range High output power Good spectral stability Compact size Good performance cost ratio Two year warranty
Application
Fiber optic sensing Optical tomography Component characterization
High Power
Fiber Laser
Specification
|
FT-93-VAS-1050-10 |
FT-93-VAS-1050-20 |
Output Power |
Min.10mW |
Min.20mW |
Spectral Range |
1040nm to 1075nm |
1020nm to 1080nm |
Min.Spectral Density |
-12dBm/nm |
|
Output Stability |
< + / - 0.03dB ( over 8 hrs), < + / -0.005dB (over 5 mins) |
|
Output Isolation |
> 40dB |
|
Output Polarization |
< 5% |
* Other output power models are available upon request
General Environmental Parameters
Parameter |
Unit |
Benchtop |
Module |
Operation Temperature Range |
¡æ |
0 to 40 |
0 to +50 |
Storage Temperature Range |
¡æ |
-10 to 70 |
-10 to +70 |
Power Supply |
V |
80 – 240 VAC, 47 – 63 Hz |
5.0 VDC |
Dimensions |
mm |
260(W)x330(L)x120(H) |
100(W)x120(L)x18(H) |
Electrical Connector |
- |
NA |
14-pin MIL Socket |
Protection |
- |
Pump laser over heat warning |
Pump laser over heat warning |
LCD Display |
- |
Pump Laser Current (mA) |
NA |
Control |
- |
Keylock switch, output power |
NA |
Computer Interface |
- |
RS232 / Ethernet |
NA |
Optical Connector |
- |
FC/APC, FC/UPC, SC/APC, SC/UPC |
|
Optical Fiber |
- |
HI 1060 |
Ordering information
FT-93-VASP-Yb-B-PW-eg-FL
B£ºBenchtop PW£ºoutput power£¬unit:mW.
eg£º30-30mW£¬50-50mW
FL£º1-standard£¬2-flatness
Important Notice
Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.
The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.