±ê×¼¹âÄ£¿é
100GBASE-SR4 QSFP28 to 2x QSFP28 Active Optical Cable
Description
100GBASE-SR4 QSFP28 to 2x QSFP28 Active Optical Cable
F-tone Networks’s 100GBASE-SR4 QSFP28 to 2x QSFP28 Active Optical Cable are designed for use in 100 Gigabit Ethernet links on up to 10km of single mode fiber. They are compliant with the QSFP28 MSA, IEEE 802.3ba QSFP+ Extender (up to 80KM or I00KM) and IEEE 802.3bm CAUI-4. Digital diagnostics functions are available via the I2C interface, as specified by the QSFP28 MSA and F-tone Networks Application Note "http://www.f-tone.com/qsfp28-reference.html". The optical transceiver is compliant per the RoHS Directive 2010. See F-tone Networks Application Note "http://www.f-tone.com/qsfp28-reference.html" for more details.
Features
• 4 channels full-duplex transceiver modules
• Transmission data rate up to 28Gbps per channel
• Support 40GE and 56G FDR data rate
• 4 channels 850nm VCSEL array
• 4 channels PIN photo detector array
• Internal CDR circuits on both receiver and transmitter channels
• Support CDR bypass
• Low power consumption : QSFP28-100G < 2.5W and QSFP28-50G <1.6W
• Hot Pluggable QSFP form factor
• Maximum link length of 70m on OM3 Multimode Fiber (MMF)and 100m on OM4 MMF
• Single MPO connector receptacle
• Operating case temperature ;Standard : 0 to +70°C;Industrial : -40 to +85°C
• 3.3V power supply voltage
• RoHS 6 compliant(lead free)
Applications
• IEEE 802.3bm 100GBASE SR4 and 40GBASE SR4
• Infiniband FDR/EDR
• 32G Fiber Channel
standards compliance
¡ñ QSFP+ End
Electrical: IBTA V2 Revision 1.2.1 and 1.3
IEEE 802.3ba
SFF-8436
¡ñ SFP+ End
SFF-8431
SFF-8432
SFF-8472
RoHS
Information:
|
Part Number |
Product Description |
|
QSFP-2QSFP-XXX |
QSFP28 to 2 x QSFP28, 100GBASE-SR4, Active Optical Cable 70m on OM3 Multimode Fiber (MMF)and 100m on OM4 Low power version,0 to +70°C |
|
QSFP-2QSFP-XXXI |
QSFP28 to 2 x QSFP28, 100GBASE-SR4, Active Optical Cable 70m on OM3 Multimode Fiber (MMF)and 100m on OM4 Low power version,-40 to +85°C |
Important Notice
Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networksbefore they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.
The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.
Related Products
QSFP28-100GBASE-SR4
F-tone QSFP28-100GBASE-SR4ÊÇÒ»¸ö 4 ͨµÀ¿É²å°Î¹âÏËQSFP28ÊÕ·¢Æ÷Ä£¿é×°ÖÃ,Éè¼ÆÓÃÓÚ100GbE¶Ì³ÌÊý¾ÝÖÐÐÄ»¥Á¬,ÇкÏIEEE802.3 100GBASE-SR4»®¶¨ºÍ 100 Ã׶àÄ£¹âÏ˽éÖʵıê×¼ ¡£±¾×°ÖÃÿ¸öÆ«Ïò¼¯³É 4 ¸ö 25.78125 Gbps µÄÊý¾ÝͨµÀ£¬µÖ´ï 103.125 Gbps µÄ¾ÛºÏ´ø¿í ¡£Í¨¹ý½ÓÄÉÒ»¸ö 8 о¹âÏË£¨»òÕß 12 о¹âÏË£©µÄ MPO ¹âѧ¶àÄ£ OM4 ÏßÀ£¬Ê¹µÃ¹âѧ»¥²Ù×÷ÐÔ³¤´ï 100 Ã× ¡£ÍÆÀʽÀ»·ÓÐÖúÓÚ¸Ã×°ÖÃÔÚ¸ßÃܶÈÁ¬½ÓÓ¦ÓÃÖвåÈëºÍÀ³ö ¡£Ã¿¸öµçÆøͨµÀÔÚ 25.78125 Gbps µÄËÙÂÊϲÙ×÷²¢ÇÒÇÐºÏ 802.3 Ìõ¿î 91 RS-FEC ÖÐ 100GE CAUI4 ½Ó¿ÚµÄ»®¶¨ ¡£QSFP28-100GBASE-SR4 ÔÚÉè¼ÆÉÏʹÓà 850nm ±ê³Æ²¨³¤ÓÚ¶àÄ£¹âÏËϵͳÉÏÔË×÷ ¡£µçÆø½Ó¿Ú½ÓÄÉ 38 ½ÓµãµÄ QSFP28 ±ßÑØÐÍÁ¬½ÓÆ÷ ¡£¹â½Ó¿Ú½ÓÄɹŰåµÄ 8 о¹âÏË£¨»òÕß 12 о¹âÏË£©MPO Á¬½ÓÆ÷ ¡£±¾×°ÖýÓÄÉ F-tone µÄÓÅÖʼ¯³Éµç·ºÍ VCSEL ¼¼Êõ£¬ÒÔ±ãΪÓû§Ìṩºã¾Ã¿É¿¿µÄ¸ßÐÔÄܺÍʼÖÕÈçÒ»µÄЧÀÍ ¡£
QSFP28-SR4¹âÄ£¿é
100GBASE-SR4 100m QSFP28 Optical Transceiver
F-tone Networks¡¯s FT-QSFP28-SR4 100G QSFP28 transceiver modules are designed for use in 100 Gigabit Ethernet links over multimode fiber. They are compliant with the QSFP28 MSA and IEEE 802.3bm 100GBASE-SR4 and CAUI-4. Digital diagnostics functions are available via the I2C interface, as specified by the QSFP28 MSA and F-tone Networks Application Note "http://www.f-tone.com/qsfp28-reference.html". The optical transceiver is compliant per the RoHS Directive 2010. See F-tone Networks Application Note "http://www.f-tone.com/qsfp28-reference.html". for more details.
QSFP28-128GFC-SR4
100GBASE-SR4, OTU4 & 128G Fibre Channel Multirate 100m QSFP28 Optical Transceiver
F-tone Networks¡¯s QSFP28-128GFC-SR4 100G QSFP28 transceiver modules are designed for use in 100 Gigabit Ethernet, 128GFC and 4x28G OTN links over multimode fiber. They are compliant with the QSFP28 MSA, 128GFC, IEEE 802.3bm 100GBASE-SR4 and CAUI-4. Digital diagnostics functions are available via the I2C interface as specified by the QSFP28 MSA. The optical transceiver is compliant per the RoHS Directive 2010. See F-tone Networks Application Note "http://www.f-tone.com/qsfp28-reference.html" for more details.
QSFP28-SR4-Limited¹âÄ£¿é
100GBASE-SR4 with Limited or No FEC QSFP28 Optical Transceiver
F-tone Networks¡¯s QSFP-SR4-Limited 100G QSFP28 transceiver modules are designed for use in 100 Gigabit Ethernet links over multimode fiber. They are compliant with the QSFP28 MSA. They are capable of operating (a) without forward error correction (FEC) provided by the host, (b) with reduced Firecode 74 FEC present per IEEE 802.3by2 25GBASE-SR and Clause 74, or (c) with full RS FEC present per IEEE 802.3bm3 100GBASE-SR4, Clause 91, and CAUI-4. Digital diagnostics functions are available via the I2C interface, as specified by the QSFP28 MSA and F-tone Networks Application Note "http://www.f-tone.com/qsfp28-reference.html". The optical transceiver is compliant per the RoHS Directive 2010. See F-tone Networks Application Note "http://www.f-tone.com/qsfp28-reference.html" for more details.
QSFP28-OTU4-2KM¹âÄ£¿é
100GE CWDM4 & OTU4 Dual Rate 2 km QSFP28 Optical Transceiver
F-tone Networks¡¯s QSFP28-OTU4-2KM QSFP28 transceiver modules are designed for use in 100 Gigabit Ethernet and 4x28G OTN client interfaces on up to 2 km of single mode fiber. They are compliant with the QSFP28 MSA, CWDM4 MSA, and relevant portions of IEEE P802.3bm. Digital diagnostics functions are available via the I2C interface, as specified by the QSFP28 MSA and F-tone Networks Application Note "http://www.f-tone.com/qsfp28-reference.html". The optical transceiver is compliant per the RoHS Directive 2010. See F-tone Networks Application Note "http://www.f-tone.com/qsfp28-reference.html" for more details.
QSFP+ Breakout to SFP+ Cage Converter
QSFP+ Breakout to SFP+ Cage Converter
F-tone Networks¡¯sQSFP+ Breakout to SFP+ Cage Converter are designed for use in 100 Gigabit Ethernet links on up to 10km of single mode fiber. They are compliant with the QSFP28 MSA, IEEE 802.3ba QSFP+ Breakout to SFP+ Cage Converter and IEEE 802.3bm CAUI-4. Digital diagnostics functions are available via the I2C interface, as specified by the QSFP28 MSA and F-tone Networks Application Note "http://www.f-tone.com/qsfp28-reference.html". The optical transceiver is compliant per the RoHS Directive 2010. See F-tone Networks Application Note "http://www.f-tone.com/qsfp28-reference.html" for more details
F-tone Networks 100G CFP to QSFP28 Adapter
QSFP+ Extender (up to 80KM or I00KM)
F-tone Networks¡¯s QSFP+ Extender (up to 80KM or I00KM) are designed for use in 100 Gigabit Ethernet links on up to 10km of single mode fiber. They are compliant with the QSFP28 MSA, IEEE 802.3ba QSFP+ Extender (up to 80KM or I00KM) and IEEE 802.3bm CAUI-4. Digital diagnostics functions are available via the I2C interface, as specified by the QSFP28 MSA and F-tone Networks Application Note "http://www.f-tone.com/qsfp28-reference.html". The optical transceiver is compliant per the RoHS Directive 2010. See F-tone Networks Application Note "http://www.f-tone.com/qsfp28-reference.html" for more details.