标准光�？�
100Gb/s QSFP28 to (4) SFP28 AOC Cable, 1~100 meters
Description
Description
SFP28 AOC can be used as an alternative solution to SFP28 DAC, while providing improved signal integrity, longer distances, superior electromagnetic immunity and better bit error rate performance. F-tone Networks's QSFP28 Active Optical Cable (AOC) consists of one QSFP28 and four SFP28 modules with a fiber cable assembly, transmitting up to 25Gbps per channel over a OM3 MMF with distance up to 70 meters or a OM4 MMF with distance up to 100 meters.
- 100G QSFP28 to 4x 25G SFP28 Breakout
- Length: 1~100 meters
- EEPROM
- up to 70 m on OM3 MMF
- up to 100 m on OM4 MMF
- Low power consumption
- Excellent EMI performance
- Temp. Range(℃): 0~70
- Ethernet 100G, 25G
- InfiniBand 4X SDR, DDR, QDR, EDR, FDR
- Fiber Channel 25G, 100G
- Rack-to-Rack, Shelf-to-Shelf Interconnect
- TOR (Top of Rack)
Important Notice
Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.
The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.
Related Products
100GBase-PSM4 QSFP28 (Parallel Single Mode 4 lanes) for MPO/MTP SMF, 1.4 km
100GBase-PSM4 QSFP28 (Parallel Single Mode 4 lanes) for MPO/MTP SMF, 1.4 km
F-tone Networks’s FT-77-AMQ28-IR4-02 is a pluggable, four-channel QSFP28 optical transceiver with bi-directional signal transmission and aggregate 100-Gbps bandwidth for 100G Ethernet. It features the Parallel Single Mode 4 Lane (PSM4) and transmission range of up to 2 km over SMF.
40 G QSFP+ to (4) SFP+ AOC Cable, OM3 MMF
40 G QSFP+ to (4) SFP+ AOC Cable, OM3 MMF
F-tone Networks’s QSFP+ to 4x SFP+ AOC cable is a 40GBase QSFP+ hybrid optical cable. A side is a QSFP+ optical connector, B side is 4 SFP+ optical connectors. It’s an application for the link with QSFP+ port on 40Gb/s rate switch or host and feeds up to 4 upstream 10Gb/s switch or host.
100 G QSFP28 to QSFP28 Twinax Copper Passive DAC Cable 0.5~5 meter
100 G QSFP28 to QSFP28 Twinax Copper Passive DAC Cable 0.5~5 meter
100Gb/s QSFP28 DAC, 8 pair differential copper pairs providing four data transmission channels at speeds up to 28Gbps per channel, and meets 100G Ethernet (4 x 25Gb/s) and InfiniBand EDR (Enhanced Data Rate) requirements.
100 G QSFP28 to (4) SFP28 Twinax Copper Passive DAC Cable 0.5~3 meter
100 G QSFP28 to (4) SFP28 Twinax Copper Passive DAC Cable 0.5~3 meter
100G QSFP28 to 4x 25G SFP28 Copper Breakout Cable application is "break-out" DAC assembly which is a hybrid transition from a QSFP28 on one terminal to four individual SFP28 on the other. The QSFP28 to four parallel bi-directional channels each operating at up to 25Gbps.
100G QSFP28 to (2) 50G QSFP28 Y Cable Passive 0.5~3 meter
100G QSFP28 to (2) 50G QSFP28 Y Cable Passive 0.5~3 meter
F-tone Networks's 100G QSFP28 to 2x 50G QSFP28 Copper Breakout Cable application is a "Y" assembly which is a hybrid transition from a QSFP on one terminal to two individual QSFP on the other. The QSFP28 to 2x 50G QSFP Break-out DAC Cable, the terminal of 50G QSFP28 offers channel 1 and channel 2, each operating at up to 28Gbps.
100Gb/s QSFP28 Active Optical Cable, 1~100 meters
100Gb/s QSFP28 Active Optical Cable, 1~100 meters
QSFP28 AOC (Active Optical Cable) consists of two QSFP28 modules and a fiber cable assembly, transmitting up to 25Gbps in each direction over a OM3 MMF with distance up to 70 meters or a OM4 MMF with distance up to 100 meters.