标准光� ？�
1.25G 40km(商温)SFP Transceiver
Description
Description
The FT-MXPD-243MD transceiver is a high performance, cost effective module that supports data-rate up to 1250Mbps.
The transmitter section and the receiver section work independently in the transceiver. The receiver section contains an InGaAs PIN photo diode, a transimpedance amplifier and a post amplifier (with working data rate up to 1250Mbps), functionally transmit received optical power to steady electrical data.
This transceiver meets the Small Form Pluggable (SFP) industry standard package utilizing an integral LC-Duplex optical interface connector. An enhanced Digital Diagnostic Monitoring Interface compliant with SFF-8472 has been incorporated into the transceiver. It allows real time access to the transceiver operating parameters such as transceiver temperature, laser bias current, transmitted optical power, received optical power and transceiver supply voltage by reading a built-in memory with I2C interface.
Features
● Operating data rate 1250Mbps
● Industry standard Small Form Pluggable (SFP) package
● Digital diagnostic monitor interface compliant with SFF-8472
● Duplex LC connector
● Single +3.3V power supply
● Differential LVPECL inputs and outputs
● TTL signal detect indicator
● Hot-pluggable capability
● RoHS compliant
Applications
● Switch to Switch interface
● Switched backplane applications
● Router/Server interface
● Other optical transmission systems
Compliance
● SFP MSA
● SFF-8472
● IEEE802.3z
● RoHS
Specification
|
Absolute Maximum Ratings |
||||||
|
Parameter |
Symbol |
Min |
Typical |
Max |
Unit |
Notes |
|
Storage Temperature |
TSTG |
-40 |
- |
+85 |
ºC |
|
|
Operating Relative Humidity （Non-condensing） |
RH |
5 |
- |
85 |
% |
|
|
Supply Voltage |
VCC |
-0.4 |
- |
3.7 |
V |
|
|
Power Dissipation |
PD |
|
|
1 |
W |
@75 ºC,3.5V |
|
Maximum Peak Current |
Ip |
|
|
400 |
mA |
|
|
Recommended Operating Conditions |
||||||
|
Parameter |
Symbol |
Min |
Typical |
Max |
Unit |
Notes |
|
Ambient temperature |
Ta |
-5 |
- |
+75 |
℃ |
Note1 |
|
Supply Voltage |
VCC |
3.135 |
3.3 |
3.465 |
V |
|
|
Data Rate |
DR |
- |
1250 |
- |
Mbps |
|
|
Power Supply Current |
Icc |
|
|
300 |
mA |
|
Notes:
[1] Commercial Temperature:-5℃~ +75 ℃.
|
Timing |
||||||
|
Parameter |
Symbol |
Min |
Typical |
Max |
Unit |
Notes |
|
TX Disable Assert Time |
t_off |
|
|
10 |
us |
|
|
TX Disable Negate Time |
t_on |
|
|
1 |
ms |
|
|
Time to initialize including reset of TX_Fault |
t_init |
|
|
300 |
ms |
|
|
TX Fault Assert Time |
t_fault |
|
|
100 |
us |
|
|
Tx Disable to Reset |
t_reset |
10 |
|
|
us |
|
|
LOS Assert Time |
t_loss_on |
|
|
100 |
us |
|
|
LOS Deassert Time |
t_loss_off |
|
|
100 |
us |
|
|
Rate Select Change Time |
t_ratesel |
|
|
10 |
us |
|
|
IIC Clock Frequency |
f_serial_clock |
100 |
|
400 |
KHz |
|
|
IIC Data Hold Time |
t_hold |
300 |
|
|
ns |
|
|
Transmitter Operating Characteristic-Optical，Electrical |
||||||
|
Parameter |
Symbol |
Min |
Typical |
Max |
Units |
Notes |
|
Differential Input Voltage |
Vin p-p |
500 |
- |
2400 |
mV |
|
|
Output Optical Power |
PO |
-5 |
- |
0 |
dBm |
Note1 |
|
Extinction Ratio |
ER |
9.5 |
- |
|
dB |
|
|
Optical Rise Time |
TR |
- |
- |
260 |
ps |
20%~80% |
|
Optical Fall Time |
TF |
- |
- |
260 |
ps |
20%~80% |
|
Center Wavelength Range |
λc |
1275 |
1310 |
1350 |
nm |
|
|
-20dB Spectral Width |
Δλ |
- |
- |
1 |
nm |
DFB-LD |
|
Side Mode Suppression Ratio |
SMSR |
30 |
- |
- |
dB |
|
|
Output Optical Eye |
Complies with IEEE802.3z eye masks when filtered minimal Eye Mask Margin 5% |
|||||
|
Tx_Disable Voltage |
VOH |
2.0 |
- |
Vcc |
V |
LVTTL |
|
VOL |
0 |
- |
0.8 |
V |
LVTTL |
|
|
Tx_Fault Voltage |
VOH |
2.0 |
- |
Vcc |
V |
LVTTL |
|
VOL |
0 |
- |
0.8 |
V |
LVTTL |
|
|
Relative Intensity Noise |
RIN |
|
|
-120 |
dB/Hz |
|
|
Optical return loss tolerance |
|
|
|
12 |
dB |
|
|
Optical Power for TX DISABLE |
Ptx-dis |
|
|
-30 |
dBm |
|
|
Input differential impedance |
Zin |
90 |
100 |
110 |
Ω |
|
Notes:
[1]1310nm DFB and PIN,40Km;
|
Receiver Operating Characteristic-Optical，Electrical |
||||||
|
Parameter |
Symbol |
Min |
Typical |
Max |
Units |
Notes |
|
Differential Output Voltage |
Vout p-p |
600 |
|
1000 |
mV |
50Ω load to Vcc-2V |
|
Receiver Sensitivity |
Sen |
|
|
-23 |
dBm |
Note1 |
|
Overload Input Power |
So |
-3 |
|
|
dBm |
|
|
Los of Signal Voltage |
VOH |
2.0 |
|
Vcc |
V |
LVTTL |
|
VOL |
0 |
|
0.8 |
V |
LVTTL |
|
|
Los Asserted |
PA |
-35 |
|
|
dBm |
|
|
Los De-asserted |
PD |
|
|
-23 |
dBm |
|
|
Los Hysteresis |
PD- PA |
1 |
|
4 |
dB |
|
|
Receiver Optical Wavelength |
λin |
1260 |
|
1620 |
nm |
|
|
Optical Return Loss |
RL |
12 |
|
|
dB |
|
|
Data Output Rise Time |
TR |
- |
- |
260 |
ps |
20%~80% |
|
Data Output Fall Time |
TF |
- |
- |
260 |
ps |
20%~80% |
|
Maximum Input Power |
Pmax |
0 |
|
|
dBm |
|
Notes:
[1]1310nm FP and PIN,40Km. Measured with a PRBS27-1 test pattern@1250Mb/s, ER=9.5dB, BER=10-12.
|
Reliability Test Definitions and Distributions |
|||||
|
Group |
Test |
Reference |
Condition |
SS[1] |
C[2] |
|
Mechanical Integrity |
Mechanical shock |
MIL-STD-883 Method 2002.3 |
5 times/axis, 1500G, 0.5ms |
11 |
0 |
|
Vibration |
MIL-STD-883 Method 2007.2 |
20G, 20~2000Hz, 4min/cys,4cys/axis |
11 |
0 |
|
|
Endurance |
Accelerated Aging |
GR-468-CORE |
85℃, 2000 hrs |
11 |
0 |
|
High temperature Storage |
GR-468-CORE |
85℃, 2000 hrs |
11 |
0 |
|
|
Low temperature Storage |
GR-468-CORE |
-40℃, 2000 hrs |
11 |
0 |
|
|
Temperature Cycles |
MIL-STD-883 Method 1010.7 GR-468-CORE |
-40℃~85℃ 500 cycles |
11 |
0 |
|
|
Damp Heat |
MIL-STD-202 Method 103 GR-468-CORE |
85 ℃, 85%RH 1000 hrs |
11 |
0 |
|
|
Cyclic moisture resistance |
MIL-STD-883 Method 1004.7 GR-468-CORE |
20 cycles |
11 |
0 |
|
|
Special Test |
ESD threshold |
MIL-STD-883E Method 3015.7 |
2000V HBM |
6 |
0 |
Note:
[1] SS: Sample Size;
[2] C: Maximum number of failure allowed in the test.
Important Notice
Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.
The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.
Related Products
100BASE-T SFP电口� ？�
100BASE-T SFP电口� ？�
大宝娱乐开发的电接口小型可插拔(SFP)收发� ？�，是专为使用RJ45连接器将100Base-FX NRZI端口接口转换为10/100Base-TX接口而设计的。该收发� ？榍泻蟂FP多源协议(MSA)和IEEE802.3u协议。通过热插拔性，该� ？榻幽杉嫒菪越锨康慕饩黾苹�，为客户提供了一种灵活和简单的方法，可以随时装置到SFP MSA兼容端口，而不会中断主机设备在线运行。
1.5G~6G SDI SFP光� ？�
100BASE-T SFP电口� ？�
大宝娱乐研爆发产Video SFP光� ？�,工业级Video SFP光� ？�,12G SDI Video SFP光� ？�,6G SDI Video SFP光� ？�,3G SDI Video SFP光� ？�,HD SDI Video SFP光� ？�,SDI Video SFP光� ？�,100%完美兼容全系列高清SDI光端机,超高清SDI光端机等等全系列设备
SFF双纤光� ？�
SFF双纤光� ？�
大宝娱乐small form-factor (SFF)是一种小型光收发器，用于电信和数据通信应用的光通信。它是一种受接待的行业花样，获得了一些光纤组件供应商的支持。SFF收发器被设计为支持SONET/SDH、千兆以太网、光纤通道和其他通信标准。
SFP+ 10G CWDM 光� ？�
SFP+ 10G CWDM 光� ？�
大宝娱乐研爆发产的CWDM SFP+光� ？槭且恢中⌒涂刹灏文 ？�，用于双向串行光数据通信，如IEEE 802.3ae 10GBASE-LR/LW/ER/ZR等。它是与SFP 20针连接器允许热插拔能力。数字诊断功效可通过I2C。该� ？樽ㄎツ９庀松杓�，事情在CWDM波长的标称波长下。
1000BASE-T Copper SFP Transceiver
1000BASE-T Copper SFP Transceiver
F-tone Networks 1000BASE-T copper SFP transceiver is based on the SFP Multi-Source Agreement (MSA). They are compatible with the Gigabit Ethernet and 1000BASE-T standards as specified in IEEE Std 802.3, which support 1000Mbps data-rate up to 100 meter reach over unshielded twisted-pair category-5 cable.